Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Fluorocell WDF
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Diagnostic Testing
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
SYSMEX AMERICA, Inc
manufacturer
577 Aptakisic Road, Lincolnshire, IL 60069 USA
847-996-4500, 1-800-3SYSMEX (1-800-379-7639)
Emergency Contacts
ChemTel Inc.
(800)255-3924
ChemTel Inc.
+1 (813)248-0585
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Symptoms: Breathing difficulty, Coughing, Dizziness, Disorientation, Unconsciousness, Danger of impaired breathing.
Immediately rinse with water. If skin irritation continues, consult a doctor.
Protect unharmed eye. Remove contact lenses if worn, if possible. Rinse opened eye for several minutes under running water. Then consult a doctor.
Symptoms: Vision disorders.
Rinse out mouth and then drink plenty of water. Do not induce vomiting; immediately call for medical help.
Symptoms: Thirst, Acidosis, Nausea, Gastric or intestinal disorders when ingested.
Immediate Medical Attention
Immediately call for medical help. Medical supervision for at least 48 hours.
Medical Treatment
If necessary oxygen respiration treatment. Consult literature for specific antidotes.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol resistant foam, Water fog / haze, Water spray, Carbon dioxide, Gaseous extinguishing agents, Fire-extinguishing powder
None.
Formation of toxic gases is possible during heating or in case of fire.
Eliminate all ignition sources if safe to do so.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Particular danger of slipping on leaked/spilled product.
For large spills, wear protective clothing. For large spills, use respiratory protective device against the effects of fumes/dust/aerosol.
Do not allow to enter sewers/ surface or ground water.
Absorb with non-combustible liquid-binding material
Materials: sand, diatomite, acid binders, universal binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of aerosols. Avoid splashes or spray in enclosed areas. Use only in well ventilated areas.
Store in a well-ventilated place. Keep cool. Avoid storage near extreme heat, ignition sources or open flame. Protect from heat and direct sunlight.
Combustible liquid. Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Toxic fumes may be released if heated above the decomposition point. Reacts with strong acids. Reacts with strong oxidizing agents. Used empty containers may contain product gases which form explosive mixtures with air. Can form explosive mixtures in air if heated above flash point and/or when sprayed or atomized.
Keep away from heat, sparks, open flames, and hot surfaces. - No smoking. Keep ignition sources away - Do not smoke. Store away from oxidizing agents.
No further relevant information available.
Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Fluorocell WDF?
The signal word is warning.
What is the physical form of Fluorocell WDF?
Fluorocell WDF is a liquid with blue color. It has odorless odor.
What is Fluorocell WDF used for?
Diagnostic Testing
What are the hazard statements for Fluorocell WDF?
This substance has 4 hazard statements:
- H227: Combustible liquid.
- H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled.
- H371: May cause damage to organs.
- H373: May cause damage to the kidneys through prolonged or repeated exposure. Route of exposure: Oral.
What is the melting point of Fluorocell WDF?
The melting point is Undetermined. and the boiling point is Undetermined..