NextSDS Logo
Safety Data Sheet EN

Fluorocell WPC

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Fluorocell WPC

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Diagnostic testing

Uses advised against

See Sections 8 and 10 for further information.

Manufacturers & Suppliers

S

SYSMEX AMERICA, Inc

manufacturer

577 Aptakisic Road, Lincolnshire, IL 60069 USA

847-996-4500, 1-800-379-7639

Emergency Contacts

ChemTel Inc.

(800)255-3924

ChemTel Inc.

+1 (813)248-0585

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3 H226
Acute Tox. Cat. 4 H302
STOT RE Cat. 2 H373

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapor.
H302 Harmful if swallowed.
H373 May cause damage to the kidneys through prolonged or repeated exposure. Route of exposure: Oral.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting/equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P260 Do not breathe mist/vapors/spray.
P264 Wash thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection.
P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P314 Get medical advice/attention if you feel unwell.
P330 Rinse mouth.
P370 + P378 In case of fire: Use for extinction: CO2, powder or water spray.
P403 + P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
ethylene glycol 107-21-1 80% Yes
ethanol 64-17-5 10 - 20% Yes

For the wording of the listed Hazard Statements refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints. In case of unconsciousness place patient stably in side position for transportation.

Skin contact

Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.

Eye contact

Remove contact lenses if worn. Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Ingestion

Rinse out mouth and then drink plenty of water. A person vomiting while lying on their back should be turned onto their side. Do not induce vomiting; immediately call for medical help.

Immediate Medical Attention

Immediately call for medical help (if swallowed).

Medical Treatment

If swallowed, gastric irrigation with added, activated carbon. Monitor circulation, possible shock treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Unsuitable media

None.

Specific hazards

Formation of toxic gases is possible during heating or in case of fire.

Instructions

Cool endangered receptacles with water spray.

Firefighter Protection

Wear self-contained respiratory protective device. Wear fully protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ensure adequate ventilation. Keep away from ignition sources. Protect from heat. Use personal protective equipment as required.

Environmental

Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

Cleanup methods

Absorb with non-combustible liquid-binding material (sand, diatomite, acid binders, universal binders). Send for recovery or disposal in suitable receptacles. Clean the affected area carefully.

Materials: sand, diatomite, acid binders, universal binders

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent formation of aerosols. Keep receptacles tightly sealed. Keep away from heat and direct sunlight. Use only in well ventilated areas.

Storage

Store in a cool location. Avoid storage near extreme heat, ignition sources or open flame. Protect from humidity and water. Store in cool, dry conditions in well sealed receptacles. This product is hygroscopic.

Fire prevention

Keep ignition sources away - Do not smoke. Protect from heat. Protect against electrostatic charges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
Not determined.
Colour
Colorless
Metal Corrosion
---
Density
---
Bulk Density
---
Odor Threshold
Not determined.
Relative Evaporation Rate
---
Vapor Pressure
59 hPa (44 mm Hg)
Properties Status
---
Voc Content
---
Cloud Point
---
Partition Coefficient
Not determined.
Upper Explosive Limit
53 Vol %
Vapor Density
Not determined.
Odor
Sweetish
Colour Intensity
---
Softening Point
---
Decomposition Temperature
Not determined.
Lower Explosive Limit
3.2 Vol %
Molecular Weight
---
Form
Liquid
Melting Point
Not determined.
Freezing Point
---
Appearance
---
Dynamic Viscosity
Not determined.
Crystallisation Point
---
Solubility In Water
Fully miscible.
Solubility In Fat
---
Solubility
---
Flash Point
33 °C (91 °F)
Ph
Not determined.
Explosive Limits
---
Solidification Point
---
Flammability
Not applicable.
Kinematic Viscosity
Not determined.
Physical State
Liquid
Auto Ignition Temperature
410 °C (770 °F)
State Under Standard Conditions
---
Physical State Data
liquid
Relative Density
1.11
Evaporation Rate
Not determined.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used and stored according to specifications.

Reactivity

No relevant information available.

Hazardous reactions

Flammable. Develops readily flammable gases / fumes. Reacts with strong acids. Can form explosive mixtures in air if heated above flash point and/or when sprayed or atomized. Reacts with peroxides and other radical forming substances.

Avoid

Keep away from heat/sparks/open flames/hot surfaces. No smoking. Excessive heat.

Incompatible

Oxidizers, Strong acids

Decomposition

Carbon monoxide and carbon dioxide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1170
Shipping Name
Ethanol mixture
Transport Class
3
Packing Group
III
ADR

Warning: Flammable liquids

IMDG

Warning: Flammable liquids

IATA

Warning: Flammable liquids

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Fluorocell WPC?

The signal word is warning.

What is the physical form of Fluorocell WPC?

Fluorocell WPC is a liquid with colorless color. It has sweetish odor.

What is Fluorocell WPC used for?

Diagnostic testing

What are the hazard statements for Fluorocell WPC?

This substance has 3 hazard statements:

  • H226: Flammable liquid and vapor.
  • H302: Harmful if swallowed.
  • H373: May cause damage to the kidneys through prolonged or repeated exposure. Route of exposure: Oral.

What is the melting point of Fluorocell WPC?

The melting point is Not determined. and the boiling point is Not determined..