NextSDS Logo
Safety Data Sheet EN

LYSERCELL WPC

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LYSERCELL WPC

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Diagnostic Testing

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

S

SYSMEX AMERICA, Inc

manufacturer

577 Aptakisic Road, Lincolnshire, IL 60069 USA

847-996-4500, 1-800-379-7639

Emergency Contacts

ChemTel Inc.

(800)255-3924

ChemTel Inc.

+1 (813)248-0585

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1 H317

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 May cause an allergic skin reaction.

Precautionary Statements

P261 Avoid breathing mist, vapors, or spray.
P272 Contaminated work clothing must not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection.
P302 + P352 If on skin: Wash with plenty of water.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P363 Wash contaminated clothing before reuse.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of the substances listed below with nonhazardous additions.

Chemical Name CAS Number Concentration Hazardous
1,2-benzisothiazol-3(2H)-one 2634-33-5 1% Yes

For the wording of the listed risk phrases refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin contact

Immediately rinse with water. If skin irritation or rash occurs: Get medical advice/attention.

Symptoms: skin irritation or rash

Eye contact

Remove contact lenses if worn, if possible. Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Symptoms: Slight irritant effect on eyes.

Ingestion

Rinse out mouth and then drink plenty of water. Do not induce vomiting; immediately call for medical help.

Immediate Medical Attention

immediately call for medical help

Medical Treatment

Treat skin and mucous membrane with antihistamine and corticoid preparations.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

The product is not flammable. Use fire fighting measures that suit the environment.

Unsuitable media

None.

Specific hazards

Formation of toxic gases is possible during heating or in case of fire.

Firefighter Protection

Wear self-contained respiratory protective device. Wear fully protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ensure adequate ventilation. Use personal protective equipment as required.

Environmental

Do not allow product to reach sewage system or any water course.

Cleanup methods

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

Materials: sand, diatomite, acid binders, universal binders, sawdust

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in well ventilated areas. Prevent formation of aerosols. Avoid splashes or spray in enclosed areas.

Storage

Store in a cool location. Keep receptacle tightly sealed.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No further relevant information available.

Hands

Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Safety glasses

Respiratory

Not required under normal conditions of use. Use suitable respiratory protective device when high concentrations are present. For large spills, respiratory protection may be advisable.

Skin/Body

Protective work clothing

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Clear
Colour Intensity
---
Form
Liquid
Odor
Odorless
Odor Threshold
Not determined.
Ph
7.3
Melting Point
Undetermined.
Boiling Point
100 °C (212 °F)
Flash Point
Not applicable.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
Not determined.
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
0.99 g/cm³ (8.262 lbs/gal)
Flammability
Not applicable.
Upper Explosive Limit
Not determined.
Lower Explosive Limit
Not determined.
Explosive Limits
---
Auto Ignition Temperature
Not determined.
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Fully miscible.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not determined.
Kinematic Viscosity
Not determined.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used and stored according to specifications.

Hazardous reactions

No dangerous reactions known.

Avoid

No decomposition if used and stored according to specifications.

Incompatible

No further relevant information available.

Decomposition

Possible in traces.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Toxicity

- Aquatic toxicity: No further relevant information available.

No further relevant information available regarding aquatic toxicity.

Persistence and degradability

No further relevant information available.

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

No further relevant information available.

Mobility in soil

No further relevant information available.

No further relevant information available.

12.1 Toxicity

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

Other adverse effects: No further relevant information available.

No further relevant information available.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Must not be disposed of together with household garbage. Do not allow product to reach sewage system.

Disposal

The user of this material has the responsibility to dispose of unused material, residues and containers in compliance with all relevant local, state and federal laws and regulations regarding treatment, storage and disposal for hazardous and nonhazardous wastes. Residual materials should be treated as hazardous.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Safety, health and environmental regulations/legislation specific for the substance or mixture

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LYSERCELL WPC?

The signal word is warning.

What is the physical form of LYSERCELL WPC?

LYSERCELL WPC is a liquid with clear color. It has odorless odor.

What is LYSERCELL WPC used for?

Diagnostic Testing

What are the hazard statements for LYSERCELL WPC?

This substance has 1 hazard statement:

  • H317: May cause an allergic skin reaction.

What is the melting point of LYSERCELL WPC?

The melting point is Undetermined. and the boiling point is 100 °C (212 °F).