MANGA K70

In exceptional conditions of dust formation/inhalation: if breathing is difficult, remove exposed person from contaminated area to fresh air. Keep the person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Get medical attention. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as collar, tie, belt or waistband.

If skin contact occurs, remove contaminated clothing and shoes, and then flush skin with plenty of running water. Clean contaminated shoes and clothing before re-use.

Irrigate with clean water for 15 minutes holding eyelids open. Check for and remove any contact lenses. Seek medical advice if irritation occurs and persists

If swallowed, rinse mouth with water. Remove dentures if any. Move exposed person to fresh air. Keep exposed person warm and at rest. If the person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if symptoms occur. Maintain an open airway. Loosen tight clothing such as collar, tie, belt or waistband.

Use dry chemicals, dry sand or CO₂ to extinguish fires involving this material. Use water spray to cool fire-exposed containers.

None known.

In exceptional cases, in case of dust formation, fine dust clouds may form explosive mixtures with air.

No action shall be taken involving any personal risk or without suitable training.

No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unauthorized personnel and visitors away. Do not touch or walk through spilled material. Use suitable protective equipment and prevent the generation of dust. Provide adequate ventilation.

Move containers from the spill area. Vacuum or sweep up the material and place it in a designated and labeled waste container. Dispose of through a licensed waste disposal contractor.

Move containers from the spill area. Approach the spill from upwind. Prevent entry into sewers, waterways, basements, or confined areas. Trained personnel may vacuum or sweep up the material and place it in a designated and labeled waste container. Avoid creating dusty conditions and prevent wind dispersal. Dispose of through a licensed waste disposal contractor.

The substance is not considered an environmental hazard. However, it is advisable to keep away from drains/waterways, recover and reuse or dispose of in accordance with national laws.

Vacuum or sweep up the material

Wash face, hands and fore-arms thoroughly after handling. Do not eat, drink or smoke when using this product. For good industrial hygiene purposes, wear personal protective equipment required for the work place.

Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use.

Wash face, hands and fore-arms thoroughly after handling. Do not eat, drink or smoke when using this product.

If user operations could generate dust or fumes, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits, or use respiratory protective equipment.

The use of protective gloves is recommended while handling the product.

It is advisable to use safety eyewear to comply with any approved standard when a risk assessment indicates this is necessary to avoid exposure to foreign bodies in the eyes. (Eg. EN166). Eye wash equipment should be available at the workplace.

Advisable in case of possible exceptional important air contamination

Protect skin from exposure with usual work ware.

Avoid discharge to sewers, storm drains, surface waters and soil. Collect the quantities of products spilled on the ground.

See section 7

No specific test data related to reactivity available for this product or its ingredients. The substance does not contain organic atoms and covalent bonds hence it is predicted to be stable

Avoid high temperature and direct contact to sunlight. Avoid drying of the product to prevent from generating dust

Keep away from oxidizing agents.

Extreme heat may generate some hazardous metallic oxides.