Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOGUL N 70
- Chemical Name
- Distillates (petroleum), heavy, hydrocracked
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119486951-26
Identified Uses
Base oil
Uses advised against
The product may not be used in any way other than those specified in sections 1 and 7.
Manufacturers & Suppliers
PARAMO, a.s.
manufacturer
Přerovská 560, 530 06 Pardubice, Czech Republic
+420 466 810 111
http://www.paramo.cz
Emergency Contacts
Control Room of PARAMO, a.s.
+420 466 303 175
Toxicological Information Centre
+420 224 919 293
24 hours, 7 days a week
Toxicological Information Centre
224 915 402
24 hours, 7 days a week
Toxicological Information Centre
224 914 575
24 hours, 7 days a week
Transport Information & Accident System (TRINS)
+420 476 709 826
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillate (petroleum) heavy hydrocracked EC: 265-077-7 | 64741-76-0 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the exposed person to fresh air or to a well-ventilated place, keep the exposed person warm and at rest, do not leave the person unattended. Get prompt medical assistance.
Symptoms: Negative effects on the central nervous system. At higher concentrations, the product vapours have narcotic effects that may cause convulsions or even death.
Remove the contaminated clothes and footwear immediately. Keep washing the affected body parts with soap and warm water and treat them with a suitable cream. Wash the contaminated clothes before re-use. Footwear and other leather clothing parts must be replaced with new.
Symptoms: Irritation, swelling or reddening.
Check for contact lenses and remove them, if present. Rinse the eyes thoroughly with ample quantity of clean (lukewarm, if possible) water for at least 15 minutes. If eye irritation persists, seek medical assistance.
Remove any artificial denture, if present. Rinse the mouth with water, but never induce vomiting – vomit should not get into the lungs. Get prompt medical attention. If nevertheless spontaneous vomiting occurs, place the exposed person to the stabilised position with his/her legs slightly elevated. Seek immediate medical assistance.
Symptoms: If swallowed, the product may cause serious damage of lungs.
Immediate Medical Attention
Get prompt medical assistance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Heavy, medium and light air-mechanical foam, type B or C fire-extinguishing powders.
Water jet (for cooling only).
Explosive mixtures with air are formed.
Firefighter Protection
Firefighting teams exposed to smoke or vapours must wear respiratory and eye protection. In confined spaces, the teams must use a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent any contamination of clothing/footwear with the product; prevent any contact with skin and eyes. Use suitable protective clothing; if contaminated, change the clothing immediately. If possible, larger spills may be covered with foam in order to control the creation of vapours and aerosols. All persons not taking part in rescue operations must be kept away to a sufficient distance.
Let absorb any residue or smaller quantities to a suitable sorbent (Vapex, Chezacarb, saw dust, sand) and place it into labelled containers for further disposal in accordance with the relevant waste disposal legislation.
If possible, larger spills may be covered with foam in order to control the creation of vapours and aerosols.
Act as quick as possible, do not allow to enter drains, underground water or watercourses and soil by enclosing the affected area (damming, closing of gulleys).
Let absorb any residue or smaller quantities to a suitable sorbent (Vapex, Chezacarb, saw dust, sand) and place it into labelled containers for further disposal in accordance with the relevant waste disposal legislation.
Materials: Vapex, Chezacarb, saw dust, sand
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Strictly no smoking or naked flames. In addition, it is necessary to avoid any inhalation of vapours or aerosol, contamination of skin and/or eyes. If handling of heavy containers is necessary, use suitable handling equipment and avoid of any possibility of slipping.
Store the product away from foodstuffs, drinks and fodder.
Do not eat, drink and smoke at work.
All fire-safety measures must be followed while handling the product. Strictly no smoking or naked flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use protective gloves resistant against oil products and tested according to EN 374; best of all made of nitrile or neoprene rubber.
Use protective goggles or safety eyewear (face shield).
Not necessary, if the vapour concentration in air is less than the concentration limits. If the opposite is the case or aerosols are created, use emergency escape mask with A, AX (brown) filters or any other mask types suitable of protecting against organic gases and vapours.
See the survey of risk control measures for the proper environmental exposure control in the exposure scenario enclosed herewith.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions.
No reactivity danger exists.
No dangerous reactions are possible.
Creation of concentrations within the explosion limits, presence of ignition sources and contact with a naked flame.
Strong oxidisers.
Under normal conditions: none; if burning under deficiency of air, carbon monoxide may be formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.5 Results of PBT and vPvB assessment
The product does not contain substances meeting the criteria for PBT or vPvB in accordance with Annex XIII, Regulation (EC) No 1907/2006 (REACH), as amended.
12.6 Other adverse effects
Not expected
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste, impaired product or unused/surplus product must be handed over to the person authorised for waste disposal according to the provisions of Act No. 185/2001 Coll., on Waste, as amended later, for the purposes of further use or disposal (according to the manufacturer's recommendations).
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Petroleum liquids under the Act on the waters, as amended, considered dangerous because of the requirements of the quality of surface and groundwater when transporting large volumes necessary to follow the advice of Standard 75 3418.
Petroleum liquids under the Act on the waters, as amended, considered dangerous because of the requirements of the quality of surface and groundwater when transporting large volumes necessary to follow the advice of Standard 75 3418.
Petroleum liquids under the Act on the waters, as amended, considered dangerous because of the requirements of the quality of surface and groundwater when transporting large volumes necessary to follow the advice of Standard 75 3418.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOGUL N 70?
The signal word is danger.
What is the physical form of MOGUL N 70?
MOGUL N 70 is a liquid with yellowish color. It has typical for gasoline odor.
What is MOGUL N 70 used for?
Base oil
What are the hazard statements for MOGUL N 70?
This substance has 1 hazard statement:
- H304: May be fatal if swallowed and enters airways