Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Barker's etching solution 200 ml HBF4 32 % + 800 ml water/l
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagents and laboratory chemicals. Only for laboratory and analysis purposes.
Uses advised against
Do not use for private purposes (household).
Manufacturers & Suppliers
AnalytiChem GmbH
manufacturer
Stempelstraße 6, D-47167 Duisburg
0203/5194-0
http://www.analytichem.de
Emergency Contacts
CHEMTREC
1-800-424-9300
Day or Night
CHEMTREC
+1 703-741-5970
Day or Night
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| fluoroboric acid EC: 240-898-3 | 16872-11-0 | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
Wash immediately with: Water
Rinse immediately carefully and thoroughly with eye-bath or water.
Rinse mouth immediately and drink plenty of water.
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Co-ordinate fire-fighting measures to the fire surroundings.
no restriction
Non-combustible liquids
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Consult an expert, Remove persons to safety
Do not allow to enter into surface water or drains.
Clean contaminated articles and floor according to the environmental legislation.
Related Products
Similar products with comparable safety profiles
Barker's etching solution
---
Fehling B solution
---
BenchMark Special Stains Deparaffinization Solution (10X)
---
Buffer Solution, pH 4.00
---
4 – 6 % BUFFERED FORMALIN
---
Tetrafluoroboric acid, 41% aqueous solution
CAS: 16872-11-0
Formaldehyde 4% aqueous solution, buffered Q path® Formalin 10%
CAS: 50-00-0
Hydrofluoric acid solution 39-40%
UFI: GQY2-RN19-GN70-78TR
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle and open container with care. Keep container tightly closed. Avoid contact with skin, eyes and clothes.
Store in a well-ventilated place. Keep container tightly closed. Store in a dry place.
Wash contaminated clothing prior to re-use. Wash hands before breaks and after work.
Usual measures for fire prevention.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment.
Protective gloves are recommended Company KCL GmbH, D-36124 Eichenzell, email: vertrieb@kcl.de With specification (test according to EN374): By long-term hand contact Trade name/designation KCL 741 Dermatril® L Suitable material: NBR (Nitrile rubber) 0,11mm Wearing time with permanent contact: >480min By short-term hand contact Trade name/designation KCL 741 Dermatril® L Suitable material: NBR (Nitrile rubber) 0,11mm Wearing time with occasional contact (splashes): >480min The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet <(>, <) > supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
goggles
Wear breathing apparatus if exposed to vapours/dusts/aerosols.
Wear suitable protective clothing.
Do not allow to enter into surface water or drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available
No data available
No data available
No data available
No data available
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Barker's etching solution 200 ml HBF4 32 % + 800 ml water/l?
The signal word is no signal word.
What is the physical form of Barker's etching solution 200 ml HBF4 32 % + 800 ml water/l?
Barker's etching solution 200 ml HBF4 32 % + 800 ml water/l is a liquid with colourless color. It has odourless odor.
What is Barker's etching solution 200 ml HBF4 32 % + 800 ml water/l used for?
Reagents and laboratory chemicals. Only for laboratory and analysis purposes.