Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 10000 mg/l Cu CertiPUR®
- Product Code
- 170378
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- This product is a mixture. REACH Registration Number see section 3.
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Germany
+49 6151 72-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
fresh air.
Take off immediately all contaminated clothing. Rinse skin with water/shower.
rinse out with plenty of water. Call in ophthalmologist.
immediately make victim drink water (two glasses at most). Consult a physician.
Immediate Medical Attention
Call in ophthalmologist. Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Ambient fire may liberate hazardous vapours.
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapours, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up with liquid-absorbent and neutralising material (e.g. Chemizorb® H⁺, Merck Art. No. 101595). Dispose of properly. Clean up affected area.
Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H⁺, Merck Art. No. 101595)
Related Products
Similar products with comparable safety profiles
Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 1000 mg/l Cu CertiPUR®
---
Iron ICP standard traceable to SRM from NIST Fe(NO₃)₃ in HNO₃ 2-3% 1000 mg/l Fe CertiPUR®
---
Iron ICP standard traceable to SRM from NIST, Fe(NO₃)₃ in HNO₃ 10% 10000 mg/l Fe CertiPUR®
---
Potassium ICP standard traceable to SRM from NIST KNO₃ in HNO₃ 2-3% 1000 mg/l K CertiPUR®
---
Lithium ICP Standard traceable to SRM from NIST LiNO₃ in HNO₃ 2-3% 1000 mg/l Li CertiPUR®
---
Strontium ICP standard traceable to SRM from NIST Sr(NO₃)₂ in HNO₃ 2-3% 1000 mg/l Sr CertiPUR®
---
Vanadium ICP standard traceable to SRM from NIST NH₄VO₃ in HNO₃ 2-3% 1000 mg/l V CertiPUR®
---
Vanadium ICP standard traceable to SRM from NIST NH₄VO₃ in HNO₃ 15% 10000 mg/l V CertiPUR®
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe label precautions.
Tightly closed. Recommended storage temperature see product label.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
full contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min; splash contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact).
Safety glasses
required when vapours/aerosols are generated. Recommended Filter type: filter E-(P2). The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
See section 10.3
Violent reactions possible with: The generally known reaction partners of water. Generates dangerous gases or fumes in contact with: Metals, metal alloys Release of:, nitrous gases, Hydrogen
no information available
Metals, metal alloys (generation of hydrogen) Cellulose
in the event of fire: See section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (CONT. NITRIC ACID NOT MORE THAN 5%)
- Transport Class
- 8
- Packing Group
- III
yes
yes
no
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 10000 mg/l Cu CertiPUR®?
The signal word is warning.
What is the physical form of Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 10000 mg/l Cu CertiPUR®?
Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 10000 mg/l Cu CertiPUR® is a liquid with light blue color. It has odourless odor.
What is Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 10000 mg/l Cu CertiPUR® used for?
Reagent for analysis
What are the hazard statements for Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 10000 mg/l Cu CertiPUR®?
This substance has 4 hazard statements:
- H290: May be corrosive to metals.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 10000 mg/l Cu CertiPUR®?
The melting point is No information available. and the boiling point is No information available..