Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Würth Zinc Spray Hell
- Product Code
- 0893 114112
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Solvent-borne coatings
Manufacturers & Suppliers
Wurth Gulf Fze
distributor
POBox 17036, Dubai, Utd.Arab Emir.
+9714 8834229
Emergency Contacts
Advisory office in case of poisoning
+9714 8834229
the company
+97150 5646023
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. In the case of inhalation of aerosol/mist consult a physician if necessary. Keep patient warm and at rest. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If unconscious place in recovery position and seek medical advice.
Take off contaminated clothing and shoes immediately. In case of contact, immediately flush skin with plenty of water. If skin irritation persists, call a physician.
Protect unharmed eye. If easy to do, remove contact lens, if worn. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed, seek medical advice immediately and show this container or label. If swallowed, DO NOT induce vomiting. If a person vomits when lying on his back, place him in the recovery position.
Immediate Medical Attention
If you feel unwell, seek medical advice. In the case of inhalation of aerosol/mist consult a physician if necessary. If skin irritation persists, call a physician. In the case of contact with eyes, seek medical advice. If swallowed, seek medical advice immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Dry powder, Carbon dioxide (CO2), Water
Hazardous decomposition products may be formed under fire conditions (see section 10). Exposure to decomposition products may be a hazard to health.
Standard procedure for chemical fires. Use water spray to cool unopened containers.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to protective measures listed in sections 7 and 8. Use personal protective equipment. Remove all sources of ignition. Avoid contact with skin and eyes. Ensure adequate ventilation, especially in confined areas. Immediately evacuate personnel to safe areas. Avoid inhalation of vapour or mist. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so.
Clean contaminated surface thoroughly.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For personal protection see section 8. Limit the stocks at work place. Handle and open container with care. Use only in well-ventilated areas. Do not breathe vapours or spray mist. Avoid contact with skin and eyes. Do not spray on a naked flame or any incandescent material. Prevent the creation of flammable or explosive concentrations of vapour in air and avoid vapour concentration higher than the occupational exposure limits. Take precautionary measures against static discharges.
Store in original container. BEWARE: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 °C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep in an area equipped with solvent resistant flooring. Please observe the storage instructions for aerosols!
Normal measures for preventive fire protection. Keep away from heat and sources of ignition. Do not smoke. No sparking tools should be used. Electrical equipment should be protected to the appropriate standard.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide sufficient air exchange and/or exhaust in work rooms.
Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer.
Tightly fitting safety goggles
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Product contains low-boiling liquids. Respiratory protective equipment must be air supplied respirators.
Flame retardant antistatic protective clothing. Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
no data available
Vapours may form explosive mixtures with air. If the temperature rises there is danger of the vessels bursting due to the high vapor pressure.
Heat, flames and sparks.
no data available
Carbon oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Würth Zinc Spray Hell?
The signal word is na: r-phrases.
What is the physical form of Würth Zinc Spray Hell?
Würth Zinc Spray Hell is a aerosol appearing as aerosol with in accordance with the product description color. It has solvent-like odor.
What is Würth Zinc Spray Hell used for?
Solvent-borne coatings