Peran PU Pgm(TP600) Part A

Move to fresh air.

Use a mild soap if available. Wash off immediately with soap and plenty of water. Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. If skin irritation persists, call a physician. Do NOT use solvents or thinners.

Symptoms: May cause sensitization by skin contact.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses. In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists, consult a specialist.

Gently wipe or rinse the inside of the mouth with water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. If swallowed, DO NOT induce vomiting unless directed to do so by medical personnel. If accidentally swallowed obtain immediate medical attention.

Carbon Dioxide, Dry Chemical

Alcohol, Alcohol based solutions, any other media not listed above.

In case of fire hazardous decomposition products may be produced such as: Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke).

Keep containers and surroundings cool with water spray.

Ensure adequate ventilation. Use personal protective equipment. Keep people away from and upwind of spill/leak.

Do not allow material to contaminate ground water system. Prevent product from entering drains. Discharge into the environment must be avoided. May cause long-term adverse effects in the aquatic environment.

soak up with non-combustible absorbent material and transfer to a container for disposal

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

Wear personal protective equipment. Repeated or prolonged skin contact may cause skin irritation and/or dermatitis and sensitization of susceptible persons. In the case of sensitisation to any of the ingredients, it is inadvisable to work with the product. Avoid contact with the skin and the eyes.

Protect from frost, heat and sunlight.

Handle in accordance with good industrial hygiene and safety practice. Keep working clothes separately. Wash hands before breaks and at the end of workday. Keep away from food, drink and animal feeding stuffs. When using, do not eat, drink or smoke. Wash hands and face before breaks and immediately after handling the product.

Avoid contact with sources of heat and ignition.

Ensure adequate ventilation, especially in confined areas. Avoid contact with skin, eyes and clothing.

Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Protective gloves. Chemical resistant gloves made of butyl rubber or nitrile rubber category III according to EN 374. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).

Eye wash bottle with pure water. Safety glasses. Safety goggles. Safety glasses with side-shields conforming to EN 166.

In case of insufficient ventilation wear suitable respiratory equipment.

Long sleeved clothing.

Stable under normal conditions.

No reactivity hazards known under normal storage and use conditions.

Hazardous polymerisation does not occur.

Avoid temperatures above 40 °C, direct sunlight and contact with sources of heat.

Strong oxidizing agents.

Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke).