Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Waterproof Patch & Seal Spray -- White
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Flexible aerosol coating
Manufacturers & Suppliers
The Gorilla Glue Company
manufacturer
2101 E. Kemper Road, Sharonville, OH 45241
513-271-3300
http://www.gorillatough.com
Emergency Contacts
Emergency Contact
1-800-420-7186
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS04
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Toluene | 108-88-3 | 10 - 30% | Yes |
| n-Heptane | 142-82-5 | 5 - 10% | Yes |
| Acetone | 67-64-1 | 5 - 10% | Yes |
| Titanium dioxide | 13463-67-7 | 1 - 5% | Yes |
| Hexane | 110-54-3 | 1 - 5% | Yes |
| Methyl alcohol | 67-56-1 | 1 - 5% | Yes |
| Xylenes (o-, m-, p- isomers) | 1330-20-7 | 1 - 5% | Yes |
Full text of hazard classes and H-statements: see section 16
Notes
* - Not applicable ** - Not applicable
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell.
Symptoms: Cough.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Symptoms: Causes skin irritation.
Rinse immediately with water for several minutes. Obtain medical attention if pain, blinking or redness persist.
Symptoms: pain, blinking or redness
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Symptoms: Harmful if swallowed
Immediate Medical Attention
Get medical advice/attention if exposed or concerned. Obtain medical attention if pain, blinking or redness persist. Obtain emergency medical attention for ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
Extremely flammable aerosol. Contents under pressure. Pressurized container may explode when exposed to heat or flame. Heat may build pressure, rupturing closed containers, spreading fire and increasing risk of burns and injuries.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. DO NOT fight fire when fire reaches explosives. Evacuate area.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Prevent entry to sewers and public waters.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Waterproof Patch & Seal Spray (Clear)
---
Waterproof Patch & Seal Liquid (White)
---
Waterproof Patch and Seal Paste – White
---
Waterproof Patch & Seal Liquid (Clear)
---
Waterproof Patch & Seal Liquid (Black)
---
Waterproof Patch and Seal Paste – Black
---
Gorilla Waterproof Patch and Seal Spray - Black
---
Gorilla Waterproof Patch & Seal Tape
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor. Do not spray on an open flame or other ignition source. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing mist/vapors/spray. Use only outdoors or in a well-ventilated area.
Keep only in the original container in a cool, well ventilated place. Do not expose to temperatures exceeding 50 °C/ 122 °F. Keep in fireproof place. Keep container tightly closed.
Wash hands thoroughly after handling. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Do not spray on an open flame or other ignition source.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Extremely flammable aerosol. Contains gas under pressure; may explode if heated.
No additional information available
Extreme risk of explosion by shock, friction, fire or other sources of ignition.
heat, shock, friction, fire, sources of ignition
Strong acids. Strong bases.
Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Waterproof Patch & Seal Spray -- White?
The signal word is danger.
What is the physical form of Waterproof Patch & Seal Spray -- White?
Waterproof Patch & Seal Spray -- White is a liquid, aerosol with white color. It has characteristic odor.
What is the solubility of Waterproof Patch & Seal Spray -- White?
No data available
What is Waterproof Patch & Seal Spray -- White used for?
Flexible aerosol coating
What are the hazard statements for Waterproof Patch & Seal Spray -- White?
This substance has 11 hazard statements:
- H222: Extremely flammable aerosol
- H224: Extremely flammable liquid and vapor
- H280: Contains gas under pressure; may explode if heated
- H302: Harmful if swallowed
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H336: May cause drowsiness or dizziness
- H351: Suspected of causing cancer
- H361: Suspected of damaging fertility or the unborn child
- H370: Causes damage to organs
- H373: May cause damage to organs through prolonged or repeated exposure
What is the melting point of Waterproof Patch & Seal Spray -- White?
The melting point is No data available and the boiling point is No data available.