Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ECCOBOND 3593 RD known as HYSOL 6oz 3593 SNP CURE UF RED
- Product Code
- 1177709
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Underfill
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silanamine, 1,1,1-trimethyl-N-(trimethylsilyl)-, hydrolysis products with silica | 68909-20-6 | 0.1 - 1% | Yes |
| Carbon black - Nano | 1333-86-4 | 0.1 - 1% | Yes |
| Silicon dioxide | 7631-86-9 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ECCOBOND FP 5201 known as Hysol FP5201 (8G)
---
LOCTITE ECCOBOND FP4549 10MLX
---
LOCTITE ECCOBOND UF 3808 50MLX
---
LOCTITE ECCOBOND FP0097 30CC
---
LOCTITE ECCOBOND FP4531 10ML
---
LOCTITE ECCOBOND FP4802 10CCMU
---
LOCTITE ECCOBOND UF 3811 known as LOC ECCOBOND UF 3811 50ML - 20DC
---
LOCTITE ECCOBOND FP4520 30ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not taste or swallow. Keep container closed. Refer to Section 8.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials. Heat, flames, sparks and other sources of ignition.
Oxidizing agents. Acids. Alkalis. Amines. Acid anhydrides. Reactive metals. Materials reactive with hydroxyl compounds. Sodium hypochlorite.
Oxides of carbon. Oxides of nitrogen. Nitric acid. Ammonia. Aldehydes. Hydrocarbons. Amide. Cyanic acids. Isocyanates. Carbamates. Toxic cyanates. Cyanogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Bisphenol-F Epichlorohydrin resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ECCOBOND 3593 RD known as HYSOL 6oz 3593 SNP CURE UF RED?
The signal word is warning.
What is the physical form of LOCTITE ECCOBOND 3593 RD known as HYSOL 6oz 3593 SNP CURE UF RED?
LOCTITE ECCOBOND 3593 RD known as HYSOL 6oz 3593 SNP CURE UF RED is a liquid, paste with black color. It has odourless / odorless odor.
What is the solubility of LOCTITE ECCOBOND 3593 RD known as HYSOL 6oz 3593 SNP CURE UF RED?
Not miscible Water
What is LOCTITE ECCOBOND 3593 RD known as HYSOL 6oz 3593 SNP CURE UF RED used for?
Underfill
What are the hazard statements for LOCTITE ECCOBOND 3593 RD known as HYSOL 6oz 3593 SNP CURE UF RED?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of LOCTITE ECCOBOND 3593 RD known as HYSOL 6oz 3593 SNP CURE UF RED?
The melting point is Not applicable, Product is a liquid and the boiling point is Not applicable, Polymerizes before boiling point is reached..