Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE LB 8013 ANTI-SIEZE known as Metal Free N-7000 High Purity
- Product Code
- 234288, 51272
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| White mineral oil~ | --- | 30 - 60% | Yes |
| Calcium oxide | 1305-78-8 | 10 - 30% | Yes |
| Graphite | 7782-42-5 | 10 - 30% | Yes |
| Calcium distearate | 1592-23-0 | 5 - 10% | Yes |
| Octadecanoic acid | 57-11-4 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Wash with soap and water. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Do not induce vomiting. Get medical attention.
Immediate Medical Attention
Aspiration may cause pulmonary edema or aspiration pneumonia.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Ventilate area. Do not allow product to enter sewer or waterways.
Store in a partly filled, closed container until disposal. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE LB 771 known as LOCTITE NICKEL ANTI-SEIZE 771
---
LOCTITE LB 8700 EXTREME PRESS RESISTANT LUB known as LOCTITE® Moly -50™ Metal-Free
---
LOCTITE LB 8150 SV A/S known as Silver Anti-Seize Lubricant
---
LOCTITE LB 8018
---
LOCTITE LB 8031
---
LOCTITE LB 8009
---
LOCTITE LB 8008 C5-A ANTI-SEIZE known as C5-A® Copper Based Anti-Seize
---
LOCTITE LB 8008 C5-A
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash thoroughly after handling. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist.
Keep in a cool, well ventilated area. Keep container closed.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not available.
Will not occur.
Prolonged exposure to heat.
Oxidizing agents.
Hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE LB 8013 ANTI-SIEZE known as Metal Free N-7000 High Purity?
The signal word is danger.
What is the physical form of LOCTITE LB 8013 ANTI-SIEZE known as Metal Free N-7000 High Purity?
LOCTITE LB 8013 ANTI-SIEZE known as Metal Free N-7000 High Purity is a paste with gray / grey color. It has characteristic odor.
What is the solubility of LOCTITE LB 8013 ANTI-SIEZE known as Metal Free N-7000 High Purity?
Insoluble Water
What is LOCTITE LB 8013 ANTI-SIEZE known as Metal Free N-7000 High Purity used for?
Lubricant
What are the hazard statements for LOCTITE LB 8013 ANTI-SIEZE known as Metal Free N-7000 High Purity?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H318: CAUSES SERIOUS EYE DAMAGE.
What is the melting point of LOCTITE LB 8013 ANTI-SIEZE known as Metal Free N-7000 High Purity?
The melting point is Not applicable, Product is a liquid and the boiling point is Not available..