NextSDS Logo
Safety Data Sheet EN

LOCTITE LIOFOL BC 1582 PA 19KG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE LIOFOL BC 1582 PA 19KG
Product Form
Coating
Product Code
2989653

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3 H226
Eye Irrit. Cat. 2A H319
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H226 FLAMMABLE LIQUID AND VAPOUR.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 + P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethanol 64-17-5 10 - 30% Yes
2-Propanol 67-63-0 1 - 5% Yes
Polyethyleneimine 9002-98-6 0.1 - 1% Yes
Methanol 67-56-1 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.

Skin contact

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and shoes. Get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated.

Eye contact

Check for and remove any contact lenses. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

If material is ingested, immediately contact a physician or poison control center. DO NOT induce vomiting unless directed to do so by medical personnel. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees. Never give anything by mouth to an unconscious person.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures appropriate to local circumstances and the surrounding environment. Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

Vapors may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

Isolate area. Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.

Cleanup methods

Transfer liquids to covered metal containers for recovery or disposal, or remove with inert absorbent. Use only non-sparking tools. Place absorbent diking materials in covered metal containers for disposal.

Materials: inert absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Make sure containers are properly grounded before use or transfer of material. Keep container closed. Do not breathe gas/fumes/vapor/spray. Use only with adequate ventilation. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not taste or swallow. Do not handle or store near an open flame, heat or other sources of ignition. 'Empty' containers retain product residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition; they may explode.

Storage

Store at or below < 90 °F (< 32.2 °C). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Remove all sources of ignition. Ground and bond metal containers for liquid transfer to avoid static sparks. Store in original container until ready to use.

Hygiene

Wash thoroughly after handling.

Fire prevention

Do not handle or store near an open flame, heat or other sources of ignition. Remove all sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Dynamic Viscosity
50 - 200 cp
Decomposition Temperature
Not available.
Physical State Data
liquid
Boiling Point
Not available.
Molecular Weight
---
Form
---
Relative Evaporation Rate
---
Odor
Alcohol
Softening Point
---
Auto Ignition Temperature
Not available.
Metal Corrosion
---
Solubility In Water
---
Flash Point
24.3 - 25.3 °C (75.74 - 77.54 °F) Internal Henkel specification
Colour Intensity
---
Partition Coefficient
Not available.
Voc Content
33 %
State Under Standard Conditions
---
Kinematic Viscosity
Not available.
Density
0.95 - 1
Properties Status
---
Ph
6.5 - 7.5
Crystallisation Point
---
Bulk Density
---
Solubility In Fat
---
Freezing Point
---
Cloud Point
---
Physical State
Liquid
Vapor Density
---
Flammability
Not applicable
Relative Density
---
Solubility
Soluble Water
Odor Threshold
Not available.
Upper Explosive Limit
Not available.
Vapor Pressure
Not available.
Explosive Limits
---
Lower Explosive Limit
Not available.
Evaporation Rate
Not available.
Melting Point
Not available.
Colour
Colourless / Colorless to light yellow
Appearance
---
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

This product may react with strong acids, bases and oxidizing agents.

Hazardous reactions

None under normal processing.

Avoid

Heat, flames, sparks and other sources of ignition. Store away from incompatible materials. Take measures to prevent the build-up of electrostatic charges.

Incompatible

Strong acids, alkalies and oxidizing agents.

Decomposition

Irritating and toxic gases or fumes may be released during a fire. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1139
Shipping Name
Coating solution
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE LIOFOL BC 1582 PA 19KG?

The signal word is warning.

What is the physical form of LOCTITE LIOFOL BC 1582 PA 19KG?

LOCTITE LIOFOL BC 1582 PA 19KG is a liquid with colourless / colorless to light yellow color. It has alcohol odor.

What is the solubility of LOCTITE LIOFOL BC 1582 PA 19KG?

Soluble Water

What are the hazard statements for LOCTITE LIOFOL BC 1582 PA 19KG?

This substance has 3 hazard statements:

  • H226: FLAMMABLE LIQUID AND VAPOUR.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.

What is the melting point of LOCTITE LIOFOL BC 1582 PA 19KG?

The melting point is Not available. and the boiling point is Not available..