Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE LIOFOL LA 3402 DR-S 197KG
- Product Code
- 3143076
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Uses advised against
This product is for industrial use only.
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethyl acetate | 141-78-6 | 60 - 80% | No |
| Polyurethane prepolymer | --- | 30 - 60% | No |
| Isophorone diamine diisocyanate | 4098-71-9 | 1 - 5% | No |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention.
Check for and remove any contact lenses. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
If material is ingested, immediately contact a physician or poison control center. DO NOT induce vomiting unless directed to do so by medical personnel. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures appropriate to local circumstances and the surrounding environment. Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Vapors may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat. Sealed containers at elevated temperatures or contaminated with water may rupture explosively.
In case of fire, keep containers cool with water spray. Isolate area. Keep unnecessary personnel away.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate area. Keep unnecessary personnel away.
For large spills absorb onto inert absorbent material and place in sealed container for disposal.
Prevent further leakage or spillage if safe to do so. Do not allow material to contaminate ground water system.
Transfer liquids to covered metal containers for recovery or disposal, or remove with inert absorbent.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container closed. Do not breathe gas/fumes/vapor/spray. Avoid contact with eyes, skin and clothing. Do not taste or swallow.
Store at or below 32.2 °C. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Do not handle or store near an open flame, heat or other sources of ignition. Remove all sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
MDI reacts slowly with water to form carbon dioxide gas. This product may react with strong acids, bases and oxidizing agents.
Exothermic. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Heat, flames, sparks and other sources of ignition. Take measures to prevent the build-up of electrostatic charges. Avoid moisture. Container can be pressurised by carbon dioxide due to reaction with humid air and/or water.
Humid air and/or water will produce carbon dioxide which will pressurize the container. Moisture. Amines. Alcohols. Ammonia. Strong bases.
Irritating and toxic gases or fumes may be released during a fire. Isocyanates. Hydrogen cyanide. Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1133
- Shipping Name
- Adhesives
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE LIOFOL LA 3402 DR-S 197KG?
The signal word is danger.
What is the physical form of LOCTITE LIOFOL LA 3402 DR-S 197KG?
LOCTITE LIOFOL LA 3402 DR-S 197KG is a liquid with colourless / colorless to light yellow color. It has solvent odor.
What is the solubility of LOCTITE LIOFOL LA 3402 DR-S 197KG?
Reacts with water.
What is LOCTITE LIOFOL LA 3402 DR-S 197KG used for?
Adhesive
What are the hazard statements for LOCTITE LIOFOL LA 3402 DR-S 197KG?
This substance has 7 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H330: FATAL IF INHALED.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of LOCTITE LIOFOL LA 3402 DR-S 197KG?
The melting point is Not available. and the boiling point is Not available..