Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE LIOFOL HS 4205 DR-F 185KG
- Product Code
- 3017374
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Hardener
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates, petroleum, steam-cracked, polymd. | 68131-77-1 | 1 - 5% | Yes |
| methacrylic acid | 79-41-4 | 0.1 - 1% | Yes |
| Toluene | 108-88-3 | 0.1 - 1% | Yes |
| Vinyl acetate | 108-05-4 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
If adverse health effects develop seek medical attention (inhalation). If symptoms develop and persist, get medical attention (skin). Get immediate medical attention (eye). Get immediate medical attention (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
None expected.
Keep unnecessary personnel away.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent contamination of soil and water.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a partly filled, closed container until disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear suitable protective clothing, gloves and eye/face protection. Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product.
Store between 5 °C (41°F) and 35 °C (95°F). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Freezing conditions.
This product may react with strong acids or oxidizing agents. Acids. Oxidizers.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE LIOFOL HS 4205 DR-F 185KG?
The signal word is warning.
What is the physical form of LOCTITE LIOFOL HS 4205 DR-F 185KG?
LOCTITE LIOFOL HS 4205 DR-F 185KG is a liquid with amber color. It has amine odor.
What is the solubility of LOCTITE LIOFOL HS 4205 DR-F 185KG?
Miscible Water
What is LOCTITE LIOFOL HS 4205 DR-F 185KG used for?
Hardener
What are the hazard statements for LOCTITE LIOFOL HS 4205 DR-F 185KG?
This substance has 2 hazard statements:
- H351: SUSPECTED OF CAUSING CANCER.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE LIOFOL HS 4205 DR-F 185KG?
The melting point is 0 °C (32°F) (Freezing point) and the boiling point is Not applicable.