Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304
- Product Code
- 1684612
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubrication Agents for Metal Working
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Castor Oil Alkylated~ | --- | 5 - 10% | Yes |
| Amine compound(s)~ | --- | 5 - 10% | Yes |
| Iodo-2-propynyl butylcarbamate, 3- | 55406-53-6 | 0.1 - 1% | Yes |
| 1,2-benzisothiazol-3(2H)-one | 2634-33-5 | 0.1 - 1% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
For skin contact flush with large amounts of water. If skin irritation persists, call a physician.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek immediate medical attention (for eyes), Get medical attention (for ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM F 738 FORMING LUBRICANT ACHESON known as MULTAN F 738
---
BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON known as MULTAN PL PREL UBE MP-404
---
BONDERITE L-FM F 750 STAMPING LUBRICANT ACHESON known as MULTAN F 750
---
BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721
---
BONDERITE L-FM 9800 POST LUBRICANT PA16KG
---
BONDERITE L-FM 560 FORMING LUBRICANT
---
BONDERITE L-FM F P 1212 AN STAMPING LUBRICANT
---
BONDERITE L-FM 727 R FORMING LUBRICANT ACHESON known as BONDERLUBE 727 R EPLENISHING
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Do not mix this product with fluids which contain NITRITES/NITRATES. NITROSAMINE may be formed. Avoid breathing vapors or mists of this product. Wash thoroughly after handling.
Keep the container tightly closed and in a cool, well-ventilated place.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.
Chemical resistant, impermeable gloves. Gloves should be tested to determine suitability for prolonged contact.
Wear safety glasses; chemical goggles (if splashing is possible).
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong acids or oxidizing agents.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials. Do not mix this product with nitrites or other nitrosating agents because a carcinogenic nitrosamine may be formed.
Nitrites may react with organic amines to form nitrosamines which can cause cancer.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304?
The signal word is warning.
What is the physical form of BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304?
BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304 is a liquid with light amber color. It has amine odor.
What is the solubility of BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304?
Complete Water
What is BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304 used for?
Lubrication Agents for Metal Working
What are the hazard statements for BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F)calculated.