Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM 3107 MACHINING LUBRICANT known as MULTAN 3107
- Product Code
- 597524
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amino alcohol | --- | 5 - 10% | No |
| Neodecanoic acid | 26896-20-8 | 5 - 10% | No |
| Boric acid | 10043-35-3 | 1 - 5% | No |
| Fatty alkanolamide | --- | 1 - 5% | No |
| Tris(2-hydroxyethyl)hexahydro triazine | 4719-04-4 | 1 - 5% | No |
| Triethanolamine | 102-71-6 | 5 - 10% | No |
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately flush with large quantities of water for at least 15 minutes. Remove contaminated clothing.
Rinse immediately with plenty of water for 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
GET MEDICAL ATTENTION. Seek immediate medical attention. Immediate medical treatment necessary.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304
---
BONDERITE L-MR 9103 MACHINING LUBRICANT known as MULTAN 9103
---
BONDERITE L-MR 5005M MACHINING LUBRICANT known as MULTAN 5005M
---
BONDERITE L-MR 2140 MACHINING LUBRICANT known as MULTAN 2140
---
BONDERITE L-MR B-200 MACHINING LUBRICANT known as MULTAN B-200
---
BONDERITE L-FM PL 1453 ACHESON STAMPING LUBRICANT known as MULTAN PL 1453
---
BONDERITE L-FM F 738 FORMING LUBRICANT ACHESON known as MULTAN F 738
---
BONDERITE L-FM DFL 520-2M FORMING LUBRICANT ACHESON known as MULTAN DFL 520-2M
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not mix this product with fluids which contain NITRITES/NITRATES. NITROSAMINE may be formed. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.
Store at or above 40 °F (4.4 °C). Keep the container tightly closed and in a cool, well-ventilated place. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong acids or oxidizing agents.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Not available.
Oxides of carbon. Do not mix this product with nitrites or other nitrosating agents because a carcinogenic nitrosamine may be formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FM 3107 MACHINING LUBRICANT known as MULTAN 3107?
The signal word is danger.
What is the physical form of BONDERITE L-FM 3107 MACHINING LUBRICANT known as MULTAN 3107?
BONDERITE L-FM 3107 MACHINING LUBRICANT known as MULTAN 3107 is a liquid with yellow-green color. It has mild amine odor.
What is the solubility of BONDERITE L-FM 3107 MACHINING LUBRICANT known as MULTAN 3107?
Complete Water
What is BONDERITE L-FM 3107 MACHINING LUBRICANT known as MULTAN 3107 used for?
Lubricant
What are the hazard statements for BONDERITE L-FM 3107 MACHINING LUBRICANT known as MULTAN 3107?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE L-FM 3107 MACHINING LUBRICANT known as MULTAN 3107?
The melting point is Not determined and the boiling point is 100 °C (212°F)calculated Aqueous solution.