Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-MR 9103 MACHINING LUBRICANT known as MULTAN 9103
- Product Code
- 593832
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Triethanolamine | 102-71-6 | 10 - 30% | Yes |
| 2-amino-2-methylpropanol | 124-68-5 | 0.1 - 1% | Yes |
| Sodium EDTA | 64-02-8 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
For skin contact flush with large amounts of water. Obtain medical attention if irritation persists.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Seek medical advice. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek immediate medical attention for eye contact. Seek medical attention if symptoms develop or persist for inhalation or skin contact.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304
---
BONDERITE L-MR 2140 MACHINING LUBRICANT known as MULTAN 2140
---
BONDERITE L-MR B-200 MACHINING LUBRICANT known as MULTAN B-200
---
BONDERITE L-FM 3107 MACHINING LUBRICANT known as MULTAN 3107
---
BONDERITE L-MR 5005M MACHINING LUBRICANT known as MULTAN 5005M
---
BONDERITE L-FM PL 1453 ACHESON STAMPING LUBRICANT known as MULTAN PL 1453
---
BONDERITE L-MR CR 46L METAL REMOVAL LUBRICANT known as MULTAN CR 46L
---
BONDERITE L-FM F 738 FORMING LUBRICANT ACHESON known as MULTAN F 738
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only. Do not mix this product with fluids which contain NITRITES/NITRATES. NITROSAMINE may be formed.
For safe storage, store between 5 °C (41°F) and 50 °C (122°F)
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product reacts with acids. Nitrites may react with organic amines to form nitrosamines which can cause cancer.
None under normal processing.
Do not mix this product with nitrites or other nitrosating agents because a carcinogenic nitrosamine may be formed.
Strong oxidizing agents. Nitrites may react with organic amines to form nitrosamines which can cause cancer. Do not mix this product with fluids which contain NITRITES/NITRATES. NITROSAMINE may be formed.
Upon decomposition, this product may yield oxides of nitrogen and ammonia, carbon dioxide, carbon monoxide and other low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (CP Bis(2-chloroethyl)ether-TMEDA)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-MR 9103 MACHINING LUBRICANT known as MULTAN 9103?
The signal word is warning.
What is the physical form of BONDERITE L-MR 9103 MACHINING LUBRICANT known as MULTAN 9103?
BONDERITE L-MR 9103 MACHINING LUBRICANT known as MULTAN 9103 is a liquid with amber color. It has mild, amine odor.
What is the solubility of BONDERITE L-MR 9103 MACHINING LUBRICANT known as MULTAN 9103?
Complete Water
What is BONDERITE L-MR 9103 MACHINING LUBRICANT known as MULTAN 9103 used for?
Lubricant
What are the hazard statements for BONDERITE L-MR 9103 MACHINING LUBRICANT known as MULTAN 9103?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE L-MR 9103 MACHINING LUBRICANT known as MULTAN 9103?
The melting point is Not available. and the boiling point is 100 °C (212°F)calculated.