Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-MR 5005M MACHINING LUBRICANT known as MULTAN 5005M
- Product Code
- 598607
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Water Soluble Cooling Lubricants for Metal Working
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy naphthenic | 64742-52-5 | 30 - 60% | Yes |
| Hydrocarbon C11-25 dearomatized | 64742-46-7 | 10 - 30% | Yes |
| Mineral oil | --- | 1 - 5% | Yes |
| Sorbitan oleate | 1338-43-8 | 1 - 5% | Yes |
| Benzenesulfonic acid, mono-C19-28-alkyl derivs., sodium salts | 70024-73-6 | 1 - 5% | Yes |
| Tris(2-hydroxyethyl)hexahydro triazine | 4719-04-4 | 1 - 5% | Yes |
| Sodium sulfonate | --- | 1 - 5% | Yes |
Notes
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If symptoms are experienced, remove source of contamination or move victim to fresh air. If symptoms develop and persist, get medical attention.
Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If symptoms develop and persist, get medical attention.
Seek medical advice. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
If symptoms develop and persist, get medical attention.
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
This product is combustible at high temperatures.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-MR B-200 MACHINING LUBRICANT known as MULTAN B-200
---
BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304
---
BONDERITE L-MR 9103 MACHINING LUBRICANT known as MULTAN 9103
---
BONDERITE L-MR 2140 MACHINING LUBRICANT known as MULTAN 2140
---
BONDERITE L-FM 3107 MACHINING LUBRICANT known as MULTAN 3107
---
BONDERITE L-MR CR 46L METAL REMOVAL LUBRICANT known as MULTAN CR 46L
---
BONDERITE L-FM PL 1453 ACHESON STAMPING LUBRICANT known as MULTAN PL 1453
---
BONDERITE L-MR B-451 SEMI SYNTHETIC COOLANT known as MULTAN B-451
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only. Do not cut or weld on empty drums.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.
Wash thoroughly after handling.
Remove all sources of ignition. Do not cut or weld on empty drums.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Upon decomposition, this product may yield poisonous gases including oxides of nitrogen, hydrogen gas and ammonia.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-MR 5005M MACHINING LUBRICANT known as MULTAN 5005M?
The signal word is warning.
What is the physical form of BONDERITE L-MR 5005M MACHINING LUBRICANT known as MULTAN 5005M?
BONDERITE L-MR 5005M MACHINING LUBRICANT known as MULTAN 5005M is a liquid with amber color. It has amine odor.
What is BONDERITE L-MR 5005M MACHINING LUBRICANT known as MULTAN 5005M used for?
Water Soluble Cooling Lubricants for Metal Working
What are the hazard statements for BONDERITE L-MR 5005M MACHINING LUBRICANT known as MULTAN 5005M?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE L-MR 5005M MACHINING LUBRICANT known as MULTAN 5005M?
The melting point is Not determined and the boiling point is 250 °F (121.1 °C) calculated.