Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-AD 5668-1 AERO ADDITIVE
- Synonyms
- TURCO 5668 ADDITIVE #1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Distillates (petroleum), hydrotreated heavy naphthenic: 80 - 100 %
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy naphthenic | 64742-52-5 | 80 - 100% | Yes |
IDH number: 597345 Product name: BONDERITE S-AD 5668-1 AERO ADDITIVE known as TURCO 5668 ADDITIVE #1
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately remove contaminated clothing and flush skin with copious amounts of water. Obtain medical attention if irritation persists.
Flush eyes with plenty of water for at least 5 minutes. If irritation persists seek medical attention.
Seek medical advice. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Medical Treatment
This material, if aspirated into the lungs, may cause lipoid pneumonitis. Treat affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide. In case of fire, keep containers cool with water spray.
Not available.
This product is combustible at high temperatures.
Fire fighters should avoid inhaling any combustion products.
Firefighter Protection
Fire fighters should wear full-face, self contained breathing apparatus and impervious protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Wear appropriate protective equipment and clothing during clean-up. Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-ST 6813E AERO
---
BONDERITE M-AD 4977B PRETREATMENT ADDITIVE known as ADDITIVE 4977B
---
BONDERITE C-AD 601A
---
BONDERITE M-AD 35
---
BONDERITE M-AD 1 PRETREATMENT ADDITIVE known as ADDITIVE 1
---
BONDERITE M-ED EA1022 ANODIZING ADDITIVE
---
BONDERITE M-AD 315 PRETREATMENT ADDITIVE known as ADDITIVE 315
---
BONDERITE M-AD 100 ADDITIVE IBC1942KG
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Provide adequate ventilation. Avoid breathing vapors or mists of this product. Keep away from heat, spark and flame. Wash thoroughly after handling. Do not reuse the empty container.
Keep the container tightly closed and in a cool, well-ventilated place.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials. Avoid strong oxidizing agents.
This product may react with strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE S-AD 5668-1 AERO ADDITIVE known by?
BONDERITE S-AD 5668-1 AERO ADDITIVE is also known as: TURCO 5668 ADDITIVE #1
What is the hazard signal word for BONDERITE S-AD 5668-1 AERO ADDITIVE?
The signal word is no signal word.
What is the physical form of BONDERITE S-AD 5668-1 AERO ADDITIVE?
BONDERITE S-AD 5668-1 AERO ADDITIVE is a liquid with light yellow color. It has mild odor.
What is the solubility of BONDERITE S-AD 5668-1 AERO ADDITIVE?
Negligible Water
What is BONDERITE S-AD 5668-1 AERO ADDITIVE used for?
Additive
What is the melting point of BONDERITE S-AD 5668-1 AERO ADDITIVE?
The melting point is Not applicable and the boiling point is > 200.4 °C (> 392.7 °F).