Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-AD 5668-3 ADDITIVE AERO known as TURCO 5668 ADDITIVE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N-Methyl-2-pyrrolidone | 872-50-4 | 80 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If symptoms are experienced, remove source of contamination or move victim to fresh air. If not breathing, give artificial respiration. Get medical attention.
For skin contact flush with large amounts of water. Obtain medical attention if irritation persists.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Not available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
This product is combustible at high temperatures.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Contain spill.
Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container. Flush area with water to remove trace residue.
Materials: inert absorbent such as sand or vermiculite
Related Products
Similar products with comparable safety profiles
BONDERITE S-AD 5668-1 AERO ADDITIVE
---
BONDERITE C-SO 4460 AERO known as TURCO 4460
---
BONDERITE S-ST 6877 AERO known as TURCO 6877
---
BONDERITE C-AK 4181 L AERO known as TURCO 4181 L
---
BONDERITE C-AK 4181 GL AERO known as TURCO 4181 GL
---
BONDERITE S-ST 6776 LO AERO known as TURCO 6776-LO
---
BONDERITE S-ST 1270-5 AERO known as TURCO 1270-5
---
BONDERITE C-AK 5578-GL AERO known as TURCO 5578-GL
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed. Provide adequate ventilation. Do not cut or weld on empty drums. Keep away from heat, spark and flame.
Store in a cool, dry, well-ventilated area. Store away from strong oxidizers. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Remove all sources of ignition.
Wash thoroughly after handling.
Keep away from heat, spark and flame. Remove all sources of ignition. Ground and bond metal containers for liquid transfer to avoid static sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, spark and flame. Heat, flames, sparks and other sources of ignition.
This product may react with strong oxidizing agents.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- Combustible liquid, n.o.s. (N-Methyl pyrrolidinone)
- Transport Class
- Combustible Liquid
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-AD 5668-3 ADDITIVE AERO known as TURCO 5668 ADDITIVE?
The signal word is warning.
What is the physical form of BONDERITE S-AD 5668-3 ADDITIVE AERO known as TURCO 5668 ADDITIVE?
BONDERITE S-AD 5668-3 ADDITIVE AERO known as TURCO 5668 ADDITIVE is a liquid with colourless / colorless color. It has amine odor.
What is the solubility of BONDERITE S-AD 5668-3 ADDITIVE AERO known as TURCO 5668 ADDITIVE?
Soluble Water
What is BONDERITE S-AD 5668-3 ADDITIVE AERO known as TURCO 5668 ADDITIVE used for?
Additive
What are the hazard statements for BONDERITE S-AD 5668-3 ADDITIVE AERO known as TURCO 5668 ADDITIVE?
This substance has 4 hazard statements:
- H227: COMBUSTIBLE LIQUID.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of BONDERITE S-AD 5668-3 ADDITIVE AERO known as TURCO 5668 ADDITIVE?
The melting point is Not applicable and the boiling point is 149 °C (300.2 °F).