Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE C-AK 5948-DPM known as TURCO 5948-DPM
- Product Code
- 1689139
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Alkaline Cleaner for Industrial Application
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 4-Nonylphenol, branched | 127087-87-0 | 5 - 10% | Yes |
| (2-Methoxymethylethoxy)propanol | 34590-94-8 | 5 - 10% | Yes |
| Monoethanolamine | 141-43-5 | 1 - 5% | Yes |
| Glycerol | 56-81-5 | 0.1 - 1% | Yes |
| Limonene, D- | 5989-27-5 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
For skin contact flush with large amounts of water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container. Dispose of according to Federal, State and local governmental regulations. Thoroughly wash the area with water after a spill or leak clean-up.
Materials: inert absorbent such as sand or vermiculite
Related Products
Similar products with comparable safety profiles
BONDERITE C-AK 5948DPM EU AERO known as TURCO 5948 DPM
---
BONDERITE C-AK 4181 L AERO known as TURCO 4181 L
---
BONDERITE C-AK 4181 GL AERO known as TURCO 4181 GL
---
BONDERITE C-AK 5578-GL AERO known as TURCO 5578-GL
---
BONDERITE C-SO 4460 AERO known as TURCO 4460
---
BONDERITE C-AK 5948 R EU AERO known as TURCO 5948 R LF200+RWE
---
BONDERITE S-ST 6877 AERO known as TURCO 6877
---
BONDERITE S-ST 1270-5 AERO known as TURCO 1270-5
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not mix this product with fluids which contain NITRITES/NITRATES. NITROSAMINE may be formed. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.
store between 5 °C (41°F) and 50 °C (122°F)
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Do not mix this product with nitrites or other nitrosating agents because a carcinogenic nitrosamine may be formed.
This product may react with oxidizing agents. Reaction with strong acids.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE C-AK 5948-DPM known as TURCO 5948-DPM?
The signal word is warning.
What is the physical form of BONDERITE C-AK 5948-DPM known as TURCO 5948-DPM?
BONDERITE C-AK 5948-DPM known as TURCO 5948-DPM is a liquid with blue color. It has orange odor.
What is the solubility of BONDERITE C-AK 5948-DPM known as TURCO 5948-DPM?
Complete Water
What is BONDERITE C-AK 5948-DPM known as TURCO 5948-DPM used for?
Alkaline Cleaner for Industrial Application
What are the hazard statements for BONDERITE C-AK 5948-DPM known as TURCO 5948-DPM?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE C-AK 5948-DPM known as TURCO 5948-DPM?
The melting point is Not applicable and the boiling point is > 93.3 °C (> 199.9 °F) calculated.