Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-ST 6930 AERO known as TURCO EA STRIPPER 6930 *MBO440G
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint stripping agents
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| benzyl alcohol | 100-51-6 | 30 - 60% | Yes |
| Hydrogen peroxide solution | 7722-84-1 | 5 - 10% | Yes |
| Limonene, D- | 5989-27-5 | 1 - 5% | Yes |
| 2-Methylbut-3-yn-2-ol | 115-19-5 | 1 - 5% | Yes |
| dibenzyl ether | 103-50-4 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
In case of contact, immediately remove contaminated clothing and flush skin with copious amounts of water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Get immediate medical attention for ingestion and eye contact.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Not a fire hazard.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Contain spill.
Wear appropriate protective equipment and clothing during clean-up. Absorb spill with inert material. Shovel material into appropriate container for disposal. Ventilate area.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-ST 6877 AERO known as TURCO 6877
---
BONDERITE S-ST 6881 AERO known as TURCO 6881 *MBO 275GLS*
---
BONDERITE S-ST 5351 THIN AERO known as TURCO 5351 THIN *MBO 275GLS*
---
BONDERITE S-ST 6776 LO AERO known as TURCO 6776-LO
---
BONDERITE S-ST 5351 AERO known as TURCO 5351 (T-5469) *MBO 330GLS
---
BONDERITE C-SO 4460 AERO known as TURCO 4460
---
BONDERITE S-ST 1270-5 AERO known as TURCO 1270-5
---
BONDERITE S-ST 6930 AERO
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Keep container closed. Provide adequate ventilation. Wash thoroughly after handling.
Keep the container tightly closed and in a cool, well-ventilated place. Protect from freezing. Supplier recommends that this product be stored with a vented bung.
Wash thoroughly after handling.
Do not store around flammable or combustible materials. Do not pressurize, cut, heat or weld containers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with oxidizing agents. Reaction with strong acids. This product may react with strong reducing agents.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-ST 6930 AERO known as TURCO EA STRIPPER 6930 *MBO440G?
The signal word is danger.
What is the physical form of BONDERITE S-ST 6930 AERO known as TURCO EA STRIPPER 6930 *MBO440G?
BONDERITE S-ST 6930 AERO known as TURCO EA STRIPPER 6930 *MBO440G is a liquid with white color. It has mild odor.
What is the solubility of BONDERITE S-ST 6930 AERO known as TURCO EA STRIPPER 6930 *MBO440G?
Appreciable Water
What is BONDERITE S-ST 6930 AERO known as TURCO EA STRIPPER 6930 *MBO440G used for?
Paint stripping agents
What are the hazard statements for BONDERITE S-ST 6930 AERO known as TURCO EA STRIPPER 6930 *MBO440G?
This substance has 5 hazard statements:
- H271: MAY CAUSE FIRE OR EXPLOSION; STRONG OXIDIZER.
- H302 + H332: HARMFUL IF SWALLOWED OR IF INHALED.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE S-ST 6930 AERO known as TURCO EA STRIPPER 6930 *MBO440G?
The melting point is Not applicable and the boiling point is > 225 °F (> 107.2 °C).