Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-AD 103 NPF Acid Inhibitor Additive IBC1315KG ACH
- Product Code
- 2946965
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Etch Inhibitors
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Propane-1,2-diol | 57-55-6 | 5 - 10
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propane-1,2-diol | 57-55-6 | 5 - 10% | Yes |
IDH number: 2946965 Product name: BONDERITE S-AD 103 NPF Acid Inhibitor Additive IBC1315KG ACH
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Remove contaminated clothing and footwear. Flush with large amounts of water.
Rinse immediately with plenty of water for 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation/skin). Seek immediate medical attention (eyes). Get medical attention (ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn. Formation of toxic gases is possible during heating or in fires.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Wear appropriate protective equipment and clothing during clean-up. Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 100 ADDITIVE IBC1942KG
---
BONDERITE S-AD 213 SF ACID INHIBITOR ADDITIVE PA17KG ACHESON
---
BONDERITE S-AD 85 ACID INHIBITOR ADDITIVE known as P3 Rodine 85 PLS 20 Kg
---
BONDERITE C-IC 72035 IBC1484KG
---
BONDERITE C-IC 72001 IBC1520KG
---
BONDERITE C-AD T51 S2 IBC1256KG Surfactant Additive
---
BONDERITE L-FM 1095 IBC1229KG
---
BONDERITE M-ZN 181X R Zinc Phosphate IBC1511KG
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Wash thoroughly after handling. For industrial use only. Do not take internally.
Store between 40 °F (4.4 °C) and 100 °F (37.8 °C). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Store away from incompatible materials.
This product may react with strong reducing agents. This product may react with strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen. Thermal decomposition may produce toxic fumes or vapors of iodine.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-AD 103 NPF Acid Inhibitor Additive IBC1315KG ACH?
The signal word is no signal word.
What is the physical form of BONDERITE S-AD 103 NPF Acid Inhibitor Additive IBC1315KG ACH?
BONDERITE S-AD 103 NPF Acid Inhibitor Additive IBC1315KG ACH is a liquid with amber color. It has neutral odor.
What is the solubility of BONDERITE S-AD 103 NPF Acid Inhibitor Additive IBC1315KG ACH?
Complete Water
What is BONDERITE S-AD 103 NPF Acid Inhibitor Additive IBC1315KG ACH used for?
Etch Inhibitors
What is the melting point of BONDERITE S-AD 103 NPF Acid Inhibitor Additive IBC1315KG ACH?
The melting point is 32 °F (0°C) and the boiling point is > 98.8 °C (> 209.8 °F).