Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE
- Product Code
- 898822
- Synonyms
- RODINE 145L
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Corrosion inhibitor
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethylene glycol | 107-21-1 | 10 - 30% | Yes |
| 2-Butoxyethanol | 111-76-2 | 5 - 10% | Yes |
| 1-(benzyl)quinolinium chloride | 15619-48-4 | 5 - 10% | Yes |
Notes
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Flush with large amounts of water. If skin irritation persists, call a physician.
Flush eye(s) immediately with plenty of water. Seek medical advice.
DO NOT induce vomiting unless directed to do so by medical personnel. Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
In the treatment of ethylene glycol overdose, ethanol competitively inhibits alcohol dehydrogenase (ADH) and prevents the formation of toxic metabolites. The affinity of ethylene glycol for ADH appears to be similar to ethanol. Ethanol should be administered only by qualified medical personnel.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
None identified.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-AD 145L ACID INHIBITOR ADDITIVE
---
BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE
---
BONDERITE S-AD 3305 ACHESON ACID INHIBITOR ADDITIVE
---
BONDERITE S-AD 213 SF ACHESON ACID INHIBITOR ADDITIVE
---
BONDERITE S-AD 213 SF ACID INHIBITOR ADDITIVE PA17KG ACHESON
---
BONDERITE S-AD 221SF ACID INHIBITOR ACHESON known as BONDERITE S-AD 221SF
---
BONDERITE S-AD 31A ACID INHIBITOR ADDITIVE known as RODINE 31A
---
BONDERITE S-AD 103 NPF Acid Inhibitor Additive IBC1315KG ACH
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing mists or aerosols of this product. Wash thoroughly after handling. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen. Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers.
Wash thoroughly after handling.
Do not pressurize, cut, heat or weld containers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Store away from incompatible materials.
Reaction with strong oxidants.
Upon decomposition, this product may yield oxides of nitrogen and ammonia, carbon dioxide, carbon monoxide and other low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE known by?
BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE is also known as: RODINE 145L
What is the hazard signal word for BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE?
The signal word is warning.
What is the physical form of BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE?
BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE is a liquid with light brown color. It has aromatic odor.
What is the solubility of BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE?
Complete Water; Miscible Water
What is BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE used for?
Corrosion inhibitor
What are the hazard statements for BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE?
This substance has 3 hazard statements:
- H227: COMBUSTIBLE LIQUID.
- H302: HARMFUL IF SWALLOWED.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE?
The melting point is <0 °F (< -17.8 °C) None and the boiling point is >100 °C (>212°F)calculated.