Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-GP 4141 CORROSION INHIBITOR known as P3 PREVOX 4141
- Product Code
- 879524
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Rust preventor
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Petroleum hydrocarbon solvent | 64742-47-8 | 80 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Immediately wash skin thoroughly with soap and water.
Rinse immediately with plenty of water for 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Get medical attention if symptoms develop and persist (skin). Seek immediate medical attention (eye). Get immediate medical attention (ingestion).
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide. Water may be an ineffective extinguishing medium.
Not available.
Fire and explosion hazards are moderate when this product is exposed to heat or flame. Vapors are heavier than air and may travel to ignition sources and flash back.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-GP 501 CORROSION INHIBITOR known as P3 PREVOX 501
---
BONDERITE L-GP 6750 CORROSION INHIBITOR known as P3 PREVOX 6750
---
BONDERITE L-GP 4232 CORROSION INHIBITOR
---
BONDERITE L-GP 4232 CORROSION INHIBITOR known as RP - 4232
---
BONDERITE S-FN 6750 CORROSION PROTECTIVE COATING known as P3-prevox 6750 KN30*RWE
---
BONDERITE L-GP 5800 CORROSION INHIBITOR
---
BONDERITE L-GP SN 400C CORROSION INHIBITOR
---
BONDERITE L-GP GP 460 CORROSION INHIBITOR AERO
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only. Keep away from heat, spark and flame.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong oxidizing agents. This product reacts with acids.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- Combustible liquid, n.o.s. (Petroleum distillates)
- Transport Class
- Combustible Liquid
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-GP 4141 CORROSION INHIBITOR known as P3 PREVOX 4141?
The signal word is danger.
What is the physical form of BONDERITE L-GP 4141 CORROSION INHIBITOR known as P3 PREVOX 4141?
BONDERITE L-GP 4141 CORROSION INHIBITOR known as P3 PREVOX 4141 is a liquid with brown color. It has characteristic odor.
What is the solubility of BONDERITE L-GP 4141 CORROSION INHIBITOR known as P3 PREVOX 4141?
Insoluble distilled water
What is BONDERITE L-GP 4141 CORROSION INHIBITOR known as P3 PREVOX 4141 used for?
Rust preventor
What are the hazard statements for BONDERITE L-GP 4141 CORROSION INHIBITOR known as P3 PREVOX 4141?
This substance has 4 hazard statements:
- H227: COMBUSTIBLE LIQUID.
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE L-GP 4141 CORROSION INHIBITOR known as P3 PREVOX 4141?
The melting point is Not determined and the boiling point is 192 °C (377.6 °F) Supplier's method.