Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-GP 501 CORROSION INHIBITOR known as P3 PREVOX 501
- Product Code
- 595486
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Corrosion inhibitor
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amine borate | 68586-07-2 | 10 - 30% | Yes |
| Boric acid | 10043-35-3 | 10 - 30% | Yes |
| Amine borate | 68954-07-4 | 0.1 - 1% | Yes |
Non hazardous components
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-GP 4141 CORROSION INHIBITOR known as P3 PREVOX 4141
---
BONDERITE L-GP 6750 CORROSION INHIBITOR known as P3 PREVOX 6750
---
BONDERITE L-GP 4232 CORROSION INHIBITOR
---
BONDERITE L-GP 5800 CORROSION INHIBITOR
---
BONDERITE S-FN 6750 CORROSION PROTECTIVE COATING known as P3-prevox 6750 KN30*RWE
---
BONDERITE L-GP SN 400C CORROSION INHIBITOR
---
BONDERITE L-GP 4232 CORROSION INHIBITOR known as RP - 4232
---
BONDERITE L-GP GP 460 CORROSION INHIBITOR AERO
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.
Keep the container tightly closed and in a cool, well-ventilated place. Protect from freezing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials.
This product may react with strong oxidizing agents. This product may react with strong reducing agents.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-GP 501 CORROSION INHIBITOR known as P3 PREVOX 501?
The signal word is danger.
What is the physical form of BONDERITE L-GP 501 CORROSION INHIBITOR known as P3 PREVOX 501?
BONDERITE L-GP 501 CORROSION INHIBITOR known as P3 PREVOX 501 is a liquid with colorless to yellow color. It has amine odor.
What is the solubility of BONDERITE L-GP 501 CORROSION INHIBITOR known as P3 PREVOX 501?
Complete Water
What is BONDERITE L-GP 501 CORROSION INHIBITOR known as P3 PREVOX 501 used for?
Corrosion inhibitor
What are the hazard statements for BONDERITE L-GP 501 CORROSION INHIBITOR known as P3 PREVOX 501?
This substance has 1 hazard statement:
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE L-GP 501 CORROSION INHIBITOR known as P3 PREVOX 501?
The melting point is Not determined and the boiling point is > 98.9 °C (> 210°F).