NextSDS Logo
Safety Data Sheet EN

BONDERITE L-GP 6750 CORROSION INHIBITOR known as P3 PREVOX 6750

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE L-GP 6750 CORROSION INHIBITOR known as P3 PREVOX 6750
Product Code
598757

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1
Skin Sens. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H318 CAUSES SERIOUS EYE DAMAGE.

Precautionary Statements

P261 Avoid breathing vapors, mist, or spray.
P264 Wash thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves.
P282 Wear eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing.
P310 Immediately call a poison control center or physician.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 Take off contaminated clothing.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Notes

Exact percentage is a trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

For skin contact flush with large amounts of water. If adverse health effects develop seek medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.

Immediate Medical Attention

Seek medical attention if symptoms develop or persist (inhalation). If adverse health effects develop seek medical attention (skin). Seek immediate medical attention (eye contact). Get medical attention (ingestion).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Specific hazards

This product is an aqueous mixture which will not burn.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Do not mix this product with fluids which contain NITRITES/NITRATES. NITROSAMINE may be formed. Avoid breathing vapors or mists of this product. Wash thoroughly after handling.

Storage

Keep the container tightly closed and in a cool, well-ventilated place. Protect from freezing.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Light yellow
Colour Intensity
---
Form
---
Odor
Amine
Odor Threshold
Not available.
Ph
9.8 - 10.0 (1% solution)
Melting Point
Not determined
Boiling Point
> 100 °C (> 212°F) calculated
Flash Point
Aqueous solution
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable
Vapor Pressure
Not applicable
Vapor Density
Not applicable
Relative Density
1.05 - 1.07 at 20 °C (68°F)
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Decomposition Temperature
Not available.
Solubility
---
Partition Coefficient
Not determined
Solubility In Water
Complete
Solubility In Fat
---
Molecular Weight
---
Voc Content
Not available.
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

This product reacts with acids.

Hazardous reactions

Will not occur.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

Strong oxidizing agents. Do not mix this product with nitrites or other nitrosating agents because a carcinogenic nitrosamine may be formed.

Decomposition

Oxides of carbon. Do not mix this product with nitrites or other nitrosating agents because a carcinogenic nitrosamine may be formed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE L-GP 6750 CORROSION INHIBITOR known as P3 PREVOX 6750?

The signal word is danger.

What is the physical form of BONDERITE L-GP 6750 CORROSION INHIBITOR known as P3 PREVOX 6750?

BONDERITE L-GP 6750 CORROSION INHIBITOR known as P3 PREVOX 6750 is a liquid with light yellow color. It has amine odor.

What are the hazard statements for BONDERITE L-GP 6750 CORROSION INHIBITOR known as P3 PREVOX 6750?

This substance has 3 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H318: CAUSES SERIOUS EYE DAMAGE.

What is the melting point of BONDERITE L-GP 6750 CORROSION INHIBITOR known as P3 PREVOX 6750?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.