Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-FN 213 DRYFILM COATING ACHESON known as DAG213
- Product Code
- 1224762
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dry film lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Toluene | 108-88-3 | 10 - 30% | Yes |
| 2-methoxy-1-methylethyl acetate | 108-65-6 | 10 - 30% | Yes |
| n-Butyl alcohol | 71-36-3 | 10 - 30% | Yes |
| CP Bisphenol A Diglycidylether | 25036-25-3 | 10 - 30% | Yes |
| Urea, polymer with formaldehyde, butylated | 68002-19-7 | 5 - 10% | Yes |
| Xylenes | 1330-20-7 | 5 - 10% | Yes |
| 2-Butoxyethanol | 111-76-2 | 1 - 5% | Yes |
| Ethylbenzene | 100-41-4 | 1 - 5% | Yes |
| Graphite | 7782-42-5 | 5 - 10% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways. Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal. Scrape up as much material as possible.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-FN 329 DRYFILM COATING ACHESON known as EMRALON329
---
BONDERITE S-FN 309 DRYFILM COATING ACHESON known as EMRALON309
---
BONDERITE L-GP M 210 DRYFILM COATING ACHESON known as MOLYDAG210
---
BONDERITE S-FN AQUADAG E CONDUCTIVE COATING ACHESON
---
BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON330
---
BONDERITE S-OT 310B FUNCTIONAL COATING ACHESON
---
BONDERITE S-FN EB-815 CONDUCTIVE COATING ACHESON known as DAG EB-815 5KG
---
BONDERITE S-FN EV 605CC CONDUCTIVE COATING PA18KG ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.
Store between 5.0 °C (41°F) and 30.0 °C (86°F). Keep container closed. Store in a cool, dry, well-ventilated area. Store in original container until ready to use. Keep out of reach of children and away from food and drink. Protect from direct sunlight. Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling. Keep out of reach of children and away from food and drink.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Heat, flames, sparks and other sources of ignition.
Strong oxidizing agents.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Hydrogen chloride. Hazardous decomposition products include chlorine compounds.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1139
- Shipping Name
- Coating solution
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-FN 213 DRYFILM COATING ACHESON known as DAG213?
The signal word is danger.
What is the physical form of BONDERITE S-FN 213 DRYFILM COATING ACHESON known as DAG213?
BONDERITE S-FN 213 DRYFILM COATING ACHESON known as DAG213 is a liquid with black color. It has solvent odor.
What is the solubility of BONDERITE S-FN 213 DRYFILM COATING ACHESON known as DAG213?
Insoluble
What is BONDERITE S-FN 213 DRYFILM COATING ACHESON known as DAG213 used for?
Dry film lubricant
What are the hazard statements for BONDERITE S-FN 213 DRYFILM COATING ACHESON known as DAG213?
This substance has 8 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE S-FN 213 DRYFILM COATING ACHESON known as DAG213?
The melting point is Not determined and the boiling point is 110 °C (230°F).