NextSDS Logo
Safety Data Sheet EN

LOCTITE DURO-TAK 129A 180KG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE DURO-TAK 129A 180KG
Product Form
Solvent based adhesive
Product Code
2825881

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2
Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
STOT SE Cat. 3
Asp. Tox. Cat. 1

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 HIGHLY FLAMMABLE LIQUID AND VAPOR.
H304 MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
H315 CAUSES SKIN IRRITATION.
H319 CAUSES SERIOUS EYE IRRITATION.
H336 MAY CAUSE DROWSINESS OR DIZZINESS.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P233 Keep container tightly closed.
P233 Keep container tightly closed.
P235 Keep cool.
P241 Use explosion-proof equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P261 Avoid breathing vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P273 No release into water.
P280 Wear protective gloves, eye protection, and face protection.
P301 + P310 IF SWALLOWED: Immediately call a physician or poison control center.
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312 Call a POISON CENTER or physician if you feel unwell.
P331 Do NOT induce vomiting.
P332 + P313 If skin irritation occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P361 If on skin (or hair): Take off immediately all contaminated clothing.
P362 Take off contaminated clothing.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
2-Propanol 67-63-0 10 - 30% Yes
Ethyl acetate 141-78-6 10 - 30% Yes
n-Heptane 142-82-5 5 - 10% Yes
Naphtha, hydrotreated light, <0,1% benzene 64742-49-0 5 - 10% Yes
Methylcyclohexane 108-87-2 1 - 5% Yes
Toluene 108-88-3 1 - 5% Yes
Pentane-2,4-dione 123-54-6 0.1 - 1% Yes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.

Skin contact

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention.

Eye contact

Check for and remove any contact lenses. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

If material is ingested, immediately contact a physician or poison control center. DO NOT induce vomiting unless directed to do so by medical personnel. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Get medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide. Use extinguishing measures appropriate to local circumstances and the surrounding environment.

Specific hazards

Vapors may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Isolate area. Keep unnecessary personnel away.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Eliminate all ignition sources (flames, hot surfaces, and sources of electrical, static or frictional sparks).

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Transfer liquids to covered metal containers for recovery or disposal, or remove with inert absorbent.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep container closed. Do not breathe gas/fumes/vapor/spray. Avoid contact with eyes, skin and clothing. Do not taste or swallow.

Storage

Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

Hygiene

Wash thoroughly after handling.

Fire prevention

Do not handle or store near an open flame, heat or other sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Auto Ignition Temperature
Not available.
Bulk Density
---
Voc Content
40.68 % (calculated)
Explosive Limits
---
Solubility
---
Flammability
Not applicable
Physical State Data
liquid
Freezing Point
---
Physical State
Liquid
Crystallisation Point
---
Ph
Not applicable
Solubility In Water
Insoluble
Solubility In Fat
---
Boiling Point
Not available.
Colour
Colorless
Colour Intensity
---
Odor Threshold
Not available.
Lower Explosive Limit
2.2 % (Ethyl acetate)
Upper Explosive Limit
11 % (Ethyl acetate)
Density
---
Appearance
---
Relative Density
---
State Under Standard Conditions
---
Cloud Point
---
Softening Point
---
Properties Status
---
Partition Coefficient
Not available.
Decomposition Temperature
Not available.
Molecular Weight
---
Vapor Density
Not available.
Evaporation Rate
Not available.
Vapor Pressure
Not available.
Metal Corrosion
---
Kinematic Viscosity
---
Solidification Point
---
Dynamic Viscosity
---
Form
---
Flash Point
-4 °C (24.8 °F)
Relative Evaporation Rate
---
Odor
Solvent
Melting Point
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Not available.

Hazardous reactions

None expected.

Avoid

Heat, flames, sparks and other sources of ignition. Take measures to prevent the build-up of electrostatic charges.

Incompatible

Strong acids, alkalies and oxidizing agents.

Decomposition

Irritating and toxic gases or fumes may be released during a fire. Oxides of carbon.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1133
Shipping Name
Adhesives
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE DURO-TAK 129A 180KG?

The signal word is danger.

What is the physical form of LOCTITE DURO-TAK 129A 180KG?

LOCTITE DURO-TAK 129A 180KG is a liquid with colorless color. It has solvent odor.

What are the hazard statements for LOCTITE DURO-TAK 129A 180KG?

This substance has 5 hazard statements:

  • H225: HIGHLY FLAMMABLE LIQUID AND VAPOR.
  • H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
  • H315: CAUSES SKIN IRRITATION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H336: MAY CAUSE DROWSINESS OR DIZZINESS.

What is the melting point of LOCTITE DURO-TAK 129A 180KG?

The melting point is Not available. and the boiling point is Not available..