NextSDS Logo
Safety Data Sheet EN

BONDERITE S-ST 6877 AERO known as TURCO 6877

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE S-ST 6877 AERO known as TURCO 6877
Product Form
Paint stripping agents
Product Code
597089

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4
Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 HARMFUL IF SWALLOWED.
H315 CAUSES SKIN IRRITATION.
H319 CAUSES SERIOUS EYE IRRITATION.

Precautionary Statements

P264 Wash thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves.
P282 Wear eye and face protection.
P301 + P312 If SWALLOWED: Immediately call poison control or physician if you feel unwell.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing.
P330 Rinse mouth.
P332 + P313 If skin irritation occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 Take off contaminated clothing.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Notes

Exact percentage is a trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

For skin contact flush with large amounts of water.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Seek medical attention if symptoms develop or persist (inhalation). Seek immediate medical attention (eye contact).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Specific hazards

This product is combustible at high temperatures.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Isolate area. Keep unnecessary personnel away.

Environmental

Prevent further leakage or spillage if safe to do so. Contain spill.

Cleanup methods

Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Provide adequate ventilation. Avoid breathing vapors or mists of this product. Do not reuse the empty container.

Storage

Keep the container tightly closed and in a cool, well-ventilated place.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
Not determined
Appearance
---
Relative Evaporation Rate
---
Flash Point
> 100 °C (> 212°F) Cleveland open cup
Freezing Point
---
Partition Coefficient
Not determined
Auto Ignition Temperature
Not determined
Properties Status
---
Solubility
---
Metal Corrosion
---
Crystallisation Point
---
Physical State Data
liquid
Bulk Density
---
Relative Density
1.00 - 1.02
Odor
Sharp acid
Solubility In Water
Disperses in water as emulsion
Decomposition Temperature
Not available.
Vapor Density
< 1
State Under Standard Conditions
---
Colour
Green
Odor Threshold
Not available.
Flammability
---
Ph
2.5 - 3.0
Lower Explosive Limit
Not available.
Solidification Point
---
Dynamic Viscosity
---
Molecular Weight
---
Boiling Point
> 104 °C (> 219.2 °F) calculated
Density
---
Physical State
Liquid
Voc Content
395 g/l
Softening Point
---
Vapor Pressure
Not available.
Kinematic Viscosity
---
Upper Explosive Limit
Not available.
Cloud Point
---
Form
---
Evaporation Rate
Not determined
Explosive Limits
---
Colour Intensity
---
Solubility In Fat
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

May react with strong bases or oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3412
Shipping Name
Formic acid
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE S-ST 6877 AERO known as TURCO 6877?

The signal word is warning.

What is the physical form of BONDERITE S-ST 6877 AERO known as TURCO 6877?

BONDERITE S-ST 6877 AERO known as TURCO 6877 is a liquid with green color. It has sharp acid odor.

What are the hazard statements for BONDERITE S-ST 6877 AERO known as TURCO 6877?

This substance has 3 hazard statements:

  • H302: HARMFUL IF SWALLOWED.
  • H315: CAUSES SKIN IRRITATION.
  • H319: CAUSES SERIOUS EYE IRRITATION.

What is the melting point of BONDERITE S-ST 6877 AERO known as TURCO 6877?

The melting point is Not determined and the boiling point is > 104 °C (> 219.2 °F) calculated.