NextSDS Logo
Safety Data Sheet EN

BONDERITE C-AK 4181 GL AERO known as TURCO 4181 GL

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-AK 4181 GL AERO known as TURCO 4181 GL
Product Code
1695856

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaners for industrial metal working

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1
Skin Corr. Cat. 1B
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

Precautionary Statements

P234 Keep only in original packaging.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Sodium hydroxide 1310-73-2 30 - 60% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat the affected person appropriately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture which will not burn.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.

Storage

For safe storage, store between -20 °C (-4°F) and 50 °C (122°F) Manufacturer recommends storing above 4.4 °C (40 °F). Thaw and mix thoroughly if frozen.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Density
---
Flammability
Not applicable
Dynamic Viscosity
Not available.
Bulk Density
---
Softening Point
---
Odor Threshold
Not available.
Metal Corrosion
---
Colour Intensity
---
Decomposition Temperature
Not available.
Physical State Data
liquid
Boiling Point
> 100 °C (> 212°F)
Appearance
---
Vapor Pressure
Not determined
Voc Content
Not applicable
Solubility In Fat
---
Physical State
Liquid
Form
---
Kinematic Viscosity
Not available.
Melting Point
Not applicable, Product is a liquid
Relative Evaporation Rate
---
Cloud Point
---
Vapor Density
---
Solidification Point
---
Freezing Point
---
Explosive Limits
---
Colour
Clear
Solubility
Complete Water; Miscible Water
Relative Density
1.45 - 1.55
Molecular Weight
---
Crystallisation Point
---
Odor
Neutral
Flash Point
> 220 °F (> 104.44 °C)
Partition Coefficient
Not available.
Solubility In Water
---
Evaporation Rate
Not applicable
Lower Explosive Limit
Not applicable
Auto Ignition Temperature
Not applicable
Upper Explosive Limit
Not applicable
State Under Standard Conditions
---
Properties Status
---
Ph
> 13.5; 14.0
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

Keep away from strong oxidizing agents, strong Lewis or mineral acids.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1824
Shipping Name
Sodium hydroxide solution
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-AK 4181 GL AERO known as TURCO 4181 GL?

The signal word is danger.

What is the physical form of BONDERITE C-AK 4181 GL AERO known as TURCO 4181 GL?

BONDERITE C-AK 4181 GL AERO known as TURCO 4181 GL is a liquid with clear color. It has neutral odor.

What is the solubility of BONDERITE C-AK 4181 GL AERO known as TURCO 4181 GL?

Complete Water; Miscible Water

What is BONDERITE C-AK 4181 GL AERO known as TURCO 4181 GL used for?

Cleaners for industrial metal working

What are the hazard statements for BONDERITE C-AK 4181 GL AERO known as TURCO 4181 GL?

This substance has 2 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

What is the melting point of BONDERITE C-AK 4181 GL AERO known as TURCO 4181 GL?

The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212°F).