Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-GP M 210 DRYFILM COATING ACHESON known as MOLYDAG210
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dry film lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air.
Immediately wash skin thoroughly with soap and water.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open.
Do not induce vomiting. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
DANGEROUS when exposed to heat or flame. This material can be ignited by flame or spark under all normal atmospheric conditions. Vapors are heavier than air and may travel to ignition sources and flash back. Formation of toxic gases is possible during heating or in fires.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel
Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-FN 213 DRYFILM COATING ACHESON known as DAG213
---
BONDERITE L-GP M 208 MOLY LUBRICANT ACHESON known as MOLYDAG 208
---
BONDERITE S-FN 329 DRYFILM COATING ACHESON known as EMRALON329
---
BONDERITE S-FN 309 DRYFILM COATING ACHESON known as EMRALON309
---
BONDERITE L-GP M TA 402 ACHESON
---
BONDERITE L-GP 154K ACHESON
---
BONDERITE L-GP 808 ACHESON
---
BONDERITE S-OT 310B FUNCTIONAL COATING ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store in original container until ready to use. Keep out of reach of children and away from food and drink. Protect from direct sunlight.
Wash thoroughly after handling. Keep out of reach of children and away from food and drink.
Ground and bond metal containers for liquid transfer to avoid static sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Avoid strong oxidizing agents. Heat, flames, sparks and other sources of ignition.
Reacts with air to form peroxides.
Thermal decomposition can lead to release of irritating gases and vapors. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1219
- Shipping Name
- Isopropyl alcohol solution
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-GP M 210 DRYFILM COATING ACHESON known as MOLYDAG210?
The signal word is danger.
What is the physical form of BONDERITE L-GP M 210 DRYFILM COATING ACHESON known as MOLYDAG210?
BONDERITE L-GP M 210 DRYFILM COATING ACHESON known as MOLYDAG210 is a liquid with gray / grey-green color. It has alcoholic odor.
What is the solubility of BONDERITE L-GP M 210 DRYFILM COATING ACHESON known as MOLYDAG210?
Disperses in water as a suspension
What is BONDERITE L-GP M 210 DRYFILM COATING ACHESON known as MOLYDAG210 used for?
Dry film lubricant
What are the hazard statements for BONDERITE L-GP M 210 DRYFILM COATING ACHESON known as MOLYDAG210?
This substance has 4 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE L-GP M 210 DRYFILM COATING ACHESON known as MOLYDAG210?
The melting point is -88.8 °C (-127.8 °F) and the boiling point is 82 °C (179.6 °F).