Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-ST 6776 LO AERO known as TURCO 6776-LO
- Product Code
- 2072363
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint stripping agents
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Component(s) | CAS Number | Weight %*
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| benzyl alcohol | 100-51-6 | 10 - 30% | Yes |
| Benzyl formate | 104-57-4 | 5 - 10% | Yes |
| Formic acid | 64-18-6 | 5 - 10% | Yes |
| Benzene, C10-16-alkyl derivs. | 68648-87-3 | 1 - 5% | Yes |
| 2-Mercaptobenzothiazole | 149-30-4 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Flush with large amounts of water.
Rinse immediately with plenty of water for 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek immediate medical attention (eye contact); Get medical attention (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Contain spill. Ventilate area. Do not allow product to enter sewer or waterways. Isolate area. Keep unnecessary personnel away.
Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container. Dispose of according to Federal, State and local governmental regulations.
Materials: inert absorbent such as sand or vermiculite
Related Products
Similar products with comparable safety profiles
BONDERITE C-MC 6045 AERO known as TURCO 6045 *MBO 275 GLS*
---
BONDERITE S-ST 6813E AERO
---
BONDERITE S-ST 1270-5 AERO 200KG
---
BONDERITE S-AD 5668-1 AERO ADDITIVE
---
BONDERITE S-MA 522 AERO C MASKANT known as TURCO FORM MASK 522 20KG
---
BONDERITE C-IC METALGLO FF AERO ACID DDEOXIDIZER known as TURCO METALGLO FF RTU
---
BONDERITE C-SO IND 79 SOLVENT CLEANER AERO known as Turco IND79 JRC19,5KG
---
BONDERITE M-NT 4595 CONV C known as ALODINE 4595
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Not available.
Keep the container tightly closed and in a cool, well-ventilated place. Protect from freezing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Avoid excessive heat and ignition sources.
May react with strong bases or oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3412
- Shipping Name
- Formic acid solution
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-ST 6776 LO AERO known as TURCO 6776-LO?
The signal word is danger.
What is the physical form of BONDERITE S-ST 6776 LO AERO known as TURCO 6776-LO?
BONDERITE S-ST 6776 LO AERO known as TURCO 6776-LO is a liquid with green color. It has sharp odor.
What is the solubility of BONDERITE S-ST 6776 LO AERO known as TURCO 6776-LO?
Appreciable Water
What is BONDERITE S-ST 6776 LO AERO known as TURCO 6776-LO used for?
Paint stripping agents
What are the hazard statements for BONDERITE S-ST 6776 LO AERO known as TURCO 6776-LO?
This substance has 3 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of BONDERITE S-ST 6776 LO AERO known as TURCO 6776-LO?
The melting point is Not applicable and the boiling point is > 93.3 °C (> 199.9 °F).