NextSDS Logo
Safety Data Sheet EN

LOCTITE CAT 9 AMB known as CATALYST 9 AMB 1LB

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE CAT 9 AMB known as CATALYST 9 AMB 1LB
Product Code
1188268

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Hardener

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Skin Corr. Cat. 1
Eye Dam. Cat. 1
Skin Sens. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H312 HARMFUL IN CONTACT WITH SKIN.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.

Precautionary Statements

P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Amines, polyethylenepoly-, tetraethylenepentamine fraction 90640-66-7 80 - 100% Yes
Amines, polyethylenepoly-, triethylenetetramine fraction 90640-67-8 5 - 10% Yes
3,6,9,12-tetraazatetradecamethylenediamine 4067-16-7 1 - 5% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

Skin contact

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a partly filled, closed container until disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Do not taste or swallow.

Storage

Keep in a cool, well ventilated area. Keep container tightly closed until ready for use.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep away from heat, sparks and open flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits.

Hands

Use chemical resistant, impermeable clothing including gloves

Eyes

Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.

Respiratory

Use NIOSH approved respirator if there is potential to exceed exposure limit(s).

Skin/Body

Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor Threshold
Not available.
Dynamic Viscosity
Not available.
Physical State
Liquid
Explosive Limits
---
Upper Explosive Limit
Not available.
Colour Intensity
---
Melting Point
Not applicable
Bulk Density
---
Boiling Point
375 °C (707°F)
Properties Status
---
Solubility
Soluble
Vapor Pressure
< 0.1 mm hg (20 °C (68°F))
Freezing Point
---
Auto Ignition Temperature
Not available.
Relative Density
0.99
Odor
Amine
Ph
Not applicable
Solubility In Fat
---
Colour
Amber
Partition Coefficient
Not determined
Lower Explosive Limit
Not available.
Solidification Point
---
Flash Point
160 °C (320°F) Pensky Martens closed cup
Voc Content
441.5 g/l
Vapor Density
---
Physical State Data
liquid
Flammability
Not applicable
Cloud Point
---
Metal Corrosion
---
Solubility In Water
---
Crystallisation Point
---
Evaporation Rate
Not applicable
Decomposition Temperature
Not available.
State Under Standard Conditions
---
Appearance
---
Relative Evaporation Rate
---
Form
---
Density
---
Molecular Weight
---
Softening Point
---
Kinematic Viscosity
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.

Incompatible

Nitrites. Strong oxidizing agents. Acids.

Decomposition

None reasonably foreseeable.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2320
Shipping Name
Tetraethylenepentamine
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE CAT 9 AMB known as CATALYST 9 AMB 1LB?

The signal word is danger.

What is the physical form of LOCTITE CAT 9 AMB known as CATALYST 9 AMB 1LB?

LOCTITE CAT 9 AMB known as CATALYST 9 AMB 1LB is a liquid with amber color. It has amine odor.

What is the solubility of LOCTITE CAT 9 AMB known as CATALYST 9 AMB 1LB?

Soluble

What is LOCTITE CAT 9 AMB known as CATALYST 9 AMB 1LB used for?

Hardener

What are the hazard statements for LOCTITE CAT 9 AMB known as CATALYST 9 AMB 1LB?

This substance has 3 hazard statements:

  • H312: HARMFUL IN CONTACT WITH SKIN.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.

What is the melting point of LOCTITE CAT 9 AMB known as CATALYST 9 AMB 1LB?

The melting point is Not applicable and the boiling point is 375 °C (707°F).