Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SI 5460H known as LOCTITE 5460H 250KG
- Product Code
- 1821555
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Silicone
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Component(s)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium carbonate | 471-34-1 | 30 - 60% | Yes |
| Butan-2-one O,O',O''-(vinylsilylidyne)trioxime | 2224-33-1 | 1 - 5% | Yes |
| Amorphous fumed silica | 68611-44-9 | 1 - 5% | Yes |
| 2-butanone oxime | 96-29-7 | 1 - 5% | Yes |
IDH number: 1821555 Product name: LOCTITE SI 5460H known as LOCTITE 5460H 250KG
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours or decomposition products.
Wipe off paste with paper towel or cloth. Wash with soap and water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Rinse out mouth, drink 1-2 glasses of water, do not induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
If symptoms develop and persist, get medical attention. If skin irritation persists, call a physician. If adverse health effects develop seek medical attention. In case of adverse health effects seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Maintain good ventilation for large spills.
Do not allow material to contaminate ground water system.
Scrape up as much material as possible. Place scrap material in a well ventilated area and allow to cure to rubber.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not wear contact lenses. Do not handle contact lenses until all sealant has been removed from hands. Residual sealant may transfer to lenses and cause eye irritation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.
For safe storage, store between 8 °C (46.4 °F) and 28 °C (82.4 °F). Store in a dry area below 90° F.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Excessive heat.
Acids and bases. Oxidizing agents.
Oxides of carbon. Oxides of silicon. Formaldehyde.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE SI 5460H known as LOCTITE 5460H 250KG?
The signal word is warning.
What is the physical form of LOCTITE SI 5460H known as LOCTITE 5460H 250KG?
LOCTITE SI 5460H known as LOCTITE 5460H 250KG is a paste with pink color. It has mild odor.
What is LOCTITE SI 5460H known as LOCTITE 5460H 250KG used for?
Silicone
What are the hazard statements for LOCTITE SI 5460H known as LOCTITE 5460H 250KG?
This substance has 4 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H351: SUSPECTED OF CAUSING CANCER.
- H372: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE SI 5460H known as LOCTITE 5460H 250KG?
The melting point is Not available. and the boiling point is >260 °C (>500°F).