Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RIEDEL TAPPING PASTE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Metalworking lubricant/coolant for cutting metals
Uses advised against
None known
Manufacturers & Suppliers
Riedel GmbH
manufacturer
Staufener Straße 2, D-79427 Eschbach
+49-(0)-7664 / 5099000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Non-hazardous Ingredients | Proprietary | 100%
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Non-hazardous Ingredients | --- | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air and keep comfortable for breathing.
Wash thoroughly with plenty of water.
Flush eyes with water, holding the eyelids apart.
If large amounts ingested, seek medical attention.
Immediate Medical Attention
Immediate medical attention generally not required.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media that is suitable for the surrounding fire.
This product is not classified as combustible.
Cool fire exposed containers with water.
Firefighter Protection
Wear NIOSH approved positive pressure, self-contained breathing apparatus and full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear appropriate personal protective equipment. Use caution: slip hazard.
Report spills and releases as required to appropriate authorities.
Collect liquid spill with an inert absorbent material and place into a suitable container for disposal. Clean area thoroughly.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes. Avoid prolonged skin contact. Avoid inhalation of vapor or mist. Do not transfer to unlabeled containers.
Store at room temperature away from extreme heat and open flames.
Store away from extreme heat and open flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use with adequate general or local exhaust ventilation to minimize exposure levels. If the product is used at high temperatures, local exhaust ventilation may be required.
If skin irritation occurs, impervious gloves such as rubber or nitrile recommended where needed to avoid skin contact
Safety glasses or goggles recommended where needed to avoid eye contact.
In operations where exposures are excessive, a NIOSH approved respirator with organic vapor/particulate cartridges or supplied air respirator appropriate for the form and concentration of the contaminants should be used. Selection and use of respiratory equipment must be in accordance with OSHA 1910.134 and good industrial hygiene practice.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and handling conditions.
Not reactive under normal conditions of use.
None known
Extreme heat and freezing.
Avoid magnesium as this product is water based.
Thermal decomposition may yield oxides of carbon and other unidentified compounds.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RIEDEL TAPPING PASTE?
The signal word is no signal word.
What is the physical form of RIEDEL TAPPING PASTE?
RIEDEL TAPPING PASTE is a semi paste appearing as green semi paste . It has slight almond odor odor.
What is RIEDEL TAPPING PASTE used for?
Metalworking lubricant/coolant for cutting metals
What is the melting point of RIEDEL TAPPING PASTE?
The melting point is 0°C (32°F) and the boiling point is 107.22° (225°F).