Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CHLOR*RID (EU)
- Product Code
- 137844
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Not available.
Uses advised against
None known.
Manufacturers & Suppliers
Corrosion Innovations
manufacturer
3500 South Richey Street, Suite 320, Houston, TX 77017
713-625-7537
Emergency Contacts
Emergency Contact
800-255-3924
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one (3:1) | 55965-84-9 | 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Call a physician if symptoms develop or persist.
Wash off with soap and water. Get medical attention if irritation develops and persists.
Rinse with water. Get medical attention if irritation develops and persists.
Rinse mouth. Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Move containers from fire area if you can do so without risk. Use standard firefighting procedures and consider the hazards of other involved materials.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Keep unnecessary personnel away. For personal protection, see section 8 of the SDS. For emergency responders: Keep unnecessary personnel away. Use personal protection recommended in Section 8 of the SDS.
Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.
Avoid discharge into drains, water courses or onto the ground.
Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Materials: vermiculite, dry sand, earth, absorbent material (e.g. cloth, fleece)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe good industrial hygiene practices.
Store in original tightly closed container.
Observe good industrial hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.
Use protective gloves made of: Polyvinyl chloride (PVC). Nitrile.
Wear safety glasses with side shields (or goggles).
In case of insufficient ventilation, wear suitable respiratory equipment.
Wear suitable protective clothing.
Environmental manager must be informed of all major releases.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
The product is stable and non-reactive under normal conditions of use, storage and transport.
No dangerous reaction known under conditions of normal use.
Avoid temperatures exceeding the flash point. Contact with incompatible materials.
Strong oxidising agents.
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CHLOR*RID (EU)?
The signal word is no signal word.
What is the physical form of CHLOR*RID (EU)?
CHLOR*RID (EU) is a liquid. with blue color. It has not available. odor.
What is CHLOR*RID (EU) used for?
Not available.
What are the hazard statements for CHLOR*RID (EU)?
This substance has 1 hazard statement:
- The mixture does not meet the criteria for classification.
What is the melting point of CHLOR*RID (EU)?
The melting point is Not available. and the boiling point is > 100 °C (> 212 °F).