Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PREVENTOL B 5
- Product Code
- 000000000056436468
- Chemical Name
- Octyl (R)-2-(4-chloro-2-methylphenoxy)propionate
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 266-358-7 Check regulations →
- REACH No.
- 01-2119928322-44
- UFI Code
- N8Y4-V00V-8004-RNJN
Identified Uses
Building material additive A tabular overview of all uses for which an exposure scenario is provided can be found at the beginning of the annex to this safety data sheet.
Manufacturers & Suppliers
LANXESS Deutschland GmbH
manufacturer
51369 Leverkusen, Germany
+49 221 8885 2288
Emergency Contacts
CHEMTREC EMEA
+44 20 3885 0382
24/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| octyl (R)-2-(4-chloro-2-methylphenoxy)propionate EC: 266-358-7 | 66423-13-0 | 94% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
Get medical attention. If on skin, rinse well with water. Continue to rinse for at least 10 minutes. If on clothes, remove clothes.
Symptoms: May cause an allergic skin reaction.
Continue rinsing eyes during transport to hospital. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Keep respiratory tract clear. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Take victim immediately to hospital.
Symptoms: Harmful if swallowed.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In case of fire, use water spray (fog), foam, dry chemical or CO₂.
None known.
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Ensure adequate ventilation.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations. Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If user operations generate dust, fumes, gas, vapour or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.
Material : Polychloroprene - CR; Wearing time : < 60 min; Material : Polyvinyl chloride - PVC; Wearing time : < 60 min; Remarks : The suitability for a specific workplace should be discussed with the producers of the protective gloves. After contamination with product change the gloves immediately and dispose of them according to relevant national and local regulations
Tightly fitting safety goggles Wear face-shield and protective suit for abnormal processing problems.
In the case of vapour formation use a respirator with an approved filter. Recommended Filter type: Combined inorganic and acidic gas/vapour, ammonia/amines and organic vapour type (ABEK)
Wear suitable protective clothing. Impervious clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No specific test data related to reactivity available for this product or its ingredients.
Under normal conditions of storage and use, hazardous reactions will not occur.
No data available
No specific data.
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (OCTYL(R)-2-(4-CHLORO-2-METHYLPHENOXY)PROPIONATE)
- Transport Class
- 9
- Packing Group
- III
Environmentally hazardous substance., Has a slight odour., Keep away from cargo susceptible to odour., Keep away from foodstuffs, acids and alkalis.
Environmentally hazardous substance., Has a slight odour., Keep away from cargo susceptible to odour., Keep away from foodstuffs, acids and alkalis.
Environmentally hazardous substance., Has a slight odour., Keep away from cargo susceptible to odour., Keep away from foodstuffs, acids and alkalis.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PREVENTOL B 5?
The signal word is warning.
What is the physical form of PREVENTOL B 5?
PREVENTOL B 5 is a liquid appearing as liquid with brown color. It has slight odor.
What is PREVENTOL B 5 used for?
Building material additive A tabular overview of all uses for which an exposure scenario is provided can be found at the beginning of the annex to this safety data sheet.
What are the hazard statements for PREVENTOL B 5?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H317: May cause an allergic skin reaction.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of PREVENTOL B 5?
The melting point is <= -70 °C and the boiling point is > 300 °C (1.002 hPa).