Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- di-Potassium hydrogen phosphate trihydrate for analysis EMSURE®
- Product Code
- 105099
Regulatory Identifiers
- CAS Number
- 16788-57-1 Check regulations →
- REACH No.
- 01-2119493919-15-XXXX
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Germany
+49 6151 72-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| di-Potassium hydrogen phosphate trihydrate for analysis EMSURE® EC: 231-834-5 | --- | --- | No |
For the full text of the H-Statements mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
fresh air.
Take off immediately all contaminated clothing. Rinse skin with water/ shower.
rinse out with plenty of water.
make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Ambient fire may liberate hazardous vapours.
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up dry.
Related Products
Similar products with comparable safety profiles
di-Potassium hydrogen phosphate anhydrous for analysis EMSURE®
CAS: 7758-11-4
di-Sodium hydrogen phosphate dihydrate for analysis EMSURE®
CAS: 10028-24-7
Potassium dihydrogen phosphate for analysis EMSURE® ISO
CAS: 7778-77-0
Potassium dihydrogen phosphate for analysis EMSURE® ISO
CAS: 7778-77-0
di-Sodium hydrogen phosphate heptahydrate for analysis EMSURE® ACS
CAS: 7782-85-6
tri-Sodium phosphate dodecahydrate for analysis EMSURE® ACS,Reag. Ph Eur
CAS: 10101-89-0
Sodium dihydrogen phosphate monohydrate for analysis EMSURE® ACS,Reag. Ph Eur
CAS: 10049-21-5
Sodium dihydrogen phosphate monohydrate for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 10049-21-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe label precautions.
Tightly closed. Dry.
Change contaminated clothing. Wash hands after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.
full contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. splash contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Safety glasses
required when dusts are generated. Recommended Filter type: Filter P 1 (acc. to DIN 3181) for solid particles of inert substances The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
See section 10.3
no information available
no information available
no information available
in the event of fire: See section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for di-Potassium hydrogen phosphate trihydrate for analysis EMSURE®?
The signal word is no signal word.
What is the physical form of di-Potassium hydrogen phosphate trihydrate for analysis EMSURE®?
di-Potassium hydrogen phosphate trihydrate for analysis EMSURE® is a solid with white color. It has odourless odor.
What is di-Potassium hydrogen phosphate trihydrate for analysis EMSURE® used for?
Reagent for analysis
What is the melting point of di-Potassium hydrogen phosphate trihydrate for analysis EMSURE®?
The melting point is ca. 340 °C (anhydrous substance), decomposes and the boiling point is No information available..