Potassium hydroxide pellets for analysis EMSURE®

After inhalation: fresh air. Call in physician.

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.

After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Potassium oxides. Not combustible. Ambient fire may liberate hazardous vapours.

Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.

Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not let product enter drains.

Take up dry. Clean up affected area.

For precautions see section 2.2.

Tightly closed. Dry. Recommended storage temperature see product label.

Full contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles

required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

protective clothing

Do not let product enter drains.

The product is chemically stable under standard ambient conditions (room temperature).

No data available

Risk of explosion with: Tetrahydrofuran, Peroxides, sodium azide, benzoyl chloride, Calcium (in powder form), carbides, Chlorine, halogen oxides, organic nitro compounds, phosphorus, nonmetallic oxides, chlorine dioxide, Fluorine, magnesium, Nitroso compound, nitrogen trichloride. Exothermic reaction with: acetonitrile, Acrolein, Aldehydes, Alcohols, acetic acid, Halogenated hydrocarbon, halogen-halogen compounds, Peroxides, hydrogen sulphide, hydrogen peroxide, vinyl acetate, Reducing agents, Acids, Acid chlorides, Acid anhydrides, peroxi compounds, Methanol, Chloroform. Risk of ignition or formation of inflammable gases or vapours with: Aluminum, Ammonium salts, Germanium, anhydrides, Oxides of phosphorus, azides, Lead, Copper, Copper alloys, Tin, Zinc. Release of: Hydrogen

no information available

Tetrahydrofuran, Peroxides, sodium azide, benzoyl chloride, Calcium, carbides, Chlorine, halogen oxides, organic nitro compounds, phosphorus, nonmetallic oxides, chlorine dioxide, Fluorine, magnesium, Nitroso compound, nitrogen trichloride, acetonitrile, Acrolein, Aldehydes, Alcohols, acetic acid, Halogenated hydrocarbon, halogen-halogen compounds, hydrogen sulphide, hydrogen peroxide, vinyl acetate, Reducing agents, Acids, Acid chlorides, Acid anhydrides, peroxi compounds, Methanol, Chloroform, Aluminum, Ammonium salts, Germanium, anhydrides, Oxides of phosphorus, azides, Lead, Copper, Copper alloys, Tin, Zinc

Hydrogen