Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Diversey Attack Plus E9e
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For professional use only. AISE-P301 - General purpose cleaner. Manual process AISE-P302 - General purpose cleaner. Spray and wipe manual process
Uses advised against
Uses other than those identified are not recommended
Manufacturers & Suppliers
Diversey Europe Operations BV
manufacturer
Maarssenbroeksedijk 2, 3542DN Utrecht, The Netherlands
Diversey Ltd
manufacturer
Weston Favell Centre, Northampton NN3 8PD, United Kingdom
01604 405311
Emergency Contacts
Emergency Contact
0800 052 0185
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| naphtha (petroleum), hydrotreated heavy EC: 265-150-3 | 64742-48-9 | 3 - 10% | Yes |
| sodium alkylbenzenesulphonate EC: 290-656-6 | 90194-45-9 | 3 - 10% | Yes |
| alkyl alcohol ethoxylate | 68439-46-3 | 3 - 10% | Yes |
| (2-methoxymethylethoxy)propanol EC: 252-104-2 | 34590-94-8 | 3 - 10% | No |
| sodium hydroxide EC: 215-185-5 | 1310-73-2 | 1 - 3% | Yes |
For the full text of the R, H and EUH phrases mentioned in this Section, see Section 16. Workplace exposure limit(s), if available, are listed in sub section 8.1.
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash skin with plenty of lukewarm, gently flowing water. Take off immediately all contaminated clothing and wash it before re-use. If skin irritation occurs: Get medical advice or attention.
Symptoms: Causes irritation.
Immediately rinse eyes cautiously with lukewarm water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE, doctor or physician.
Symptoms: Causes severe or permanent damage.
Rinse mouth. Immediately drink 1 glass of water. Get medical attention or advice if you feel unwell.
Symptoms: No known effects or symptoms in normal use.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.
No special hazards known.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drainage system, surface or ground water. Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
ECO Disinfect
---
5180 Surface Disinfectant Cleaner 1I ALL
UFI: 4JA2-V00H-000M-SK9A
Cidezyme XTRA
---
Cleaning Solution D
---
EPIDIAN® 4X80
UFI: VMU2-902X-U00E-G6T4
BONDERITE M-PT E3B REACTION RINSE known as AQUENCE E3B RXN RINSE LF205 WENS
---
Electronic Cleaning Solvent Plus
---
BONDERITE M-PT E3B REACTION RINSE known as AQUENCE E3B RXN RINSE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Sealed Air. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Use personal protective equipment as required. Avoid contact with eyes. Use only with adequate ventilation.
Store in accordance with local and national regulations. Keep only in original container. Store in a closed container.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Sealed Air. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Use personal protective equipment as required. Avoid contact with eyes. Use only with adequate ventilation.
No special precautions required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Undiluted: If the product is diluted by using specific dosing systems with no risk of splashes or direct skin contact, the personal protection equipment as described in this section is not required. Diluted: Use only in well ventilated areas.
Undiluted: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber, Penetration time: >= 480 min, Material thickness: >= 0.7 mm. Suggested gloves for protection against splashes: Material: nitrile rubber, Penetration time: >= 30 min, Material thickness: >= 0.4 mm. In consultation with the supplier of protective gloves a different type providing similar protection may be chosen. Diluted: Rinse and dry hands after use. For prolonged contact protection for the skin may be necessary.
Undiluted: Safety glasses or goggles (EN 166). Diluted: No special requirements under normal use conditions.
No special requirements under normal use conditions.
No special requirements under normal use conditions.
No special requirements under normal use conditions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and use conditions.
No reactivity hazards known under normal storage and use conditions.
No hazardous reactions known under normal storage and use conditions.
None known under normal storage and use conditions.
Reacts with acids.
None known under normal storage and use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Diversey Attack Plus E9e?
The signal word is danger.
What is the physical form of Diversey Attack Plus E9e?
Diversey Attack Plus E9e is a liquid with clear, yellow color. It has product specific odor.
What is Diversey Attack Plus E9e used for?
For professional use only. AISE-P301 - General purpose cleaner. Manual process AISE-P302 - General purpose cleaner. Spray and wipe manual process
What are the hazard statements for Diversey Attack Plus E9e?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
What is the melting point of Diversey Attack Plus E9e?
The melting point is Not determined and the boiling point is Not determined.