NextSDS Logo
Safety Data Sheet EN

Equinox HG Floor Coating

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Equinox HG Floor Coating
Product Code
139

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Floor Finish

Uses advised against

Other than per labelled instructions

Manufacturers & Suppliers

Amano Pioneer Eclipse Corporation logo

Amano Pioneer Eclipse Corporation

manufacturer

P.O. Box 909, 1 Eclipse Road, Sparta, NC 28675

1-336-372-8080

http://www.pioneereclipse.com

Emergency Contacts

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
diethylene glycol monoethyl ether 111-90-0 3 - 7% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathing is difficult, remove to fresh air. If symptoms persist, seek medical attention.

Symptoms: None expected under normal use.

Skin contact

Wash with soap and plenty of water. If irritation develops and persists, seek medical attention.

Symptoms: None expected under normal use.

Eye contact

Rinse with plenty of water. If irritation develops and persists, seek medical attention.

Symptoms: None expected under normal use.

Ingestion

If ingested, do not induce vomiting. Seek medical attention.

Symptoms: None expected under normal use.

Immediate Medical Attention

Seek medical attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry Chemical, water spray, foam, carbon dioxide. Use extinguishing agent suitable to the surrounding fire.

Specific hazards

Materials can splatter above 212 °F / 100 °C

Instructions

No special fire fighting procedures recommended. Follow all general fire safety guidelines.

Firefighter Protection

No special fire fighting procedures recommended. Follow all general fire safety guidelines.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Put on personal protective equipment (see Section 8). Keep spectators away. Floors may be slippery: use care to avoid falling.

Small spill

Absorb spill with inert material (e.g. sand, earth) and dispose of as waste material in accordance with local, state and federal regulations.

Large spill

Dike and contain spill with inert material (e.g. sand, earth). Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for disposal.

Environmental

Keep spills and cleaning run-off out of sewers and open bodies of water.

Cleanup methods

Absorb spill with inert material (e.g. sand, earth). Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for disposal.

Materials: inert material (e.g. sand, earth)

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes and skin. Wash thoroughly after handling. Use in well-ventilated areas.

Storage

Keep from freezing. Keep container sealed when not in use. Keep out of reach of children.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only with adequate ventilation. Use local ventilation and other engineering controls to maintain airborne contaminants below established and recommended exposure limits. If this product contains ingredients with exposure limits, monitoring may be required to determine the effectiveness of ventilation and other control measures.

Hands

In case of prolonged use or sensitive skin, chemical resistant gloves are recommended.

Eyes

Personal protective equipment not required with normal use. If there is a risk of product being splashed: Wear eye protection.

Respiratory

Personal protective equipment not required with normal use. General room ventilation should be adequate. Respiratory protection should be worn if there is a potential of inadequate ventilation. If exposure limits are exceeded or symptoms are experienced, use an approved respirator.

Skin/Body

Personal protective equipment not required with normal use.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Milky white
Colour Intensity
---
Form
---
Odor
Characteristic
Odor Threshold
---
Ph
8.0
Melting Point
---
Boiling Point
---
Flash Point
>200 °F / >93 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
Data not available
Relative Density
---
Bulk Density
---
Density
8.6 lb/gal @ 68°F / 1.03 kg/l @ 20°C
Flammability
Not applicable
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
Miscible in water
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
< 0.1%
Metal Corrosion
---
Dynamic Viscosity
< 10 centipoise @ 68 °F (20 °C)
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions

Reactivity

Not reactive under normal conditions

Hazardous reactions

None expected under normal conditions.

Avoid

None known under normal conditions.

Incompatible

Do not mix with other chemicals unless stated on the product label.

Decomposition

None known

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Ecotoxicity: Ecological testing has not been completed on the mixture.

12.2 Persistence and degradability

Persistence and Degradability: Data not available.

12.3 Bioaccumulative potential

Bioaccumulative Potential: Data not available.

12.4 Mobility in soil

Mobility in Soil: Data not available.

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

Other Adverse Effects: Data not available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

It is the responsibility of the end user to determine, at the time of disposal, if the waste solution meets the criteria for hazardous waste.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Equinox HG Floor Coating?

The signal word is no signal word.

What is the physical form of Equinox HG Floor Coating?

Equinox HG Floor Coating is a liquid with milky white color. It has characteristic odor.

What is the solubility of Equinox HG Floor Coating?

Miscible in water

What is Equinox HG Floor Coating used for?

Floor Finish