Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Kupfer + Messing Polierschaum mit Anlaufschutz
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent
Uses advised against
None known.
Manufacturers & Suppliers
Delu Ako Minky GmbH
manufacturer
Hauptstraße 103, 53619 Rheinbreitbach / GERMANY
(+49) 02224-1800-0
http://www.delu.de
Emergency Contacts
Advisory body
+49 (0) 551-19240
24h
EN, DE
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Citric acid monohydrate | 5949-29-1 | 1 - 5% | Yes |
| Alkylethersulphate sodium salt | 68891-38-3 | 1 - 5% | Yes |
| Alcohols, C16-18 and C18-unsatd., ethoxylated | 68920-66-1 | 1 - 3% | Yes |
| Thiourea | 62-56-6 | 0.1 - 1% | Yes |
| Dodecylmercaptane | 112-55-0 | 0.1 - 0.25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air.
In case of contact with skin wash off with warm water.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Shield unaffected eye.
Rinse out mouth and give plenty of water to drink. Do not induce vomiting.
Immediate Medical Attention
Consult a doctor if skin irritation persists. Consult a doctor immediately (for eye contact). Get medical advice (for ingestion).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product itself is non-combustible. Fire extinguishing method of surrounding areas must be considered.
Full water jet.
Risk of formation of toxic pyrolysis products. Sulphur oxides (SOx).
Firefighter Protection
Use self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. High risk of slipping due to leakage/spillage of product. Forms slippery surfaces with water.
Prevent spread over a wide area (e.g. by containment or oil barriers).
Pick up with absorbent material
Materials: sand, sawdust, universal absorbent, diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. Use personal protective equipment. Open and handle container with care.
Keep container in a well-ventilated place. Keep container tightly closed.
Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash before reuse. Wash hands before breaks and after work. Use barrier skin cream.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation on workstation. Measurement methods for taking workplace measurements must meet the performance requirements of DIN EN 482. For example, recommendations are given in the IFA's list of hazardous substances.
The details concerned are recommendations. Please contact the glove supplier for further information. In full contact: > 0,4mm: butyl rubber, > 120 min (EN 374)
Safety glasses. (EN 166:2001) Face shield. (EN 166)
Not required under normal conditions.
Acid-resistant protective clothing (EN 340)
Protect the environment by applying appropriate control measures to prevent or limit emissions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal ambient conditions (ambient temperature).
No dangerous reactions known if used as directed.
Reactions with alkalies (lyes). Reactions with strong oxidizing agents.
Strong heating.
See SECTION 10.3.
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Dodecane-1-thiol; Alcohols, C16-18 and C18-unsatd., ethoxylated)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Kupfer + Messing Polierschaum mit Anlaufschutz?
The signal word is danger.
What is the physical form of Kupfer + Messing Polierschaum mit Anlaufschutz?
Kupfer + Messing Polierschaum mit Anlaufschutz is a liquid with yellow color. It has pleasant odor.
What is Kupfer + Messing Polierschaum mit Anlaufschutz used for?
Cleaning agent
What are the hazard statements for Kupfer + Messing Polierschaum mit Anlaufschutz?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Kupfer + Messing Polierschaum mit Anlaufschutz?
The melting point is No information available. and the boiling point is No information available..