NextSDS Logo
Safety Data Sheet EN

Metabo Kühlschmierstift

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Metabo Kühlschmierstift
Product Code
62344300

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant

Manufacturers & Suppliers

M

Metabowerke GmbH

manufacturer

Metabo-Allee-1 – DE-72622 Nürtingen

0049 / (0) 7022 / 72-0

Emergency Contacts

EMERGENCY CONTACT - UK, UAE, South Africa

++44 1865 407333

24h

EN

TRANSPORT EMERGENCY CONTACT - UK, UAE, South Africa

++44 1865 407333

24h

EN

GIFTNOTRUF/TRANSPORTNOTRUF - Deutschland

++49 69 222 25285

24h

DE, EN

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Preparation of different active substances

Chemical Name CAS Number Concentration Hazardous
Distillates (petroleum), hydrotreated light naphthenic EC: 265-156-6 64742-53-6 0.1 - 1% Yes
Ditertiododecylpentasufid EC: 270-335-7 68425-15-0 20 - 25% Yes
Benzolsulfonsäuren, di-C10-18-alkyl Derivate, Calcium-Salze EC: 298-637-4 93820-57-6 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove the casualty into fresh air and keep him immobile. In the event of symptoms refer for medical treatment.

Skin contact

In case of contact with skin wash off immediately with soap and water. Consult a doctor if skin irritation persists.

Eye contact

In case of contact with eyes rinse with plenty of water carefully. In the event of persistent symptoms seek medical treatment.

Ingestion

Seek medical advice. Do not induce vomiting. Rinse out mouth thoroughly with water.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol-resistant foam, Carbon dioxide, sand, Water spray jet

Unsuitable media

Full water jet

Specific hazards

In case of fire formation of dangerous gases possible.

Instructions

Do not inhale explosion and/or combustion gases.

Firefighter Protection

Fire-fighting operations, rescue and clearing work under effect of combustion and smoulder gases just may be done with breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not discharge into the drains or bodies of water.

Cleanup methods

Take up with absorbent material

Materials: sand, kieselguhr, acid binder, general-purpose binder, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid formation of oil dust. Open and handle container with care! Avoid contact with eyes and skin. Ensure sufficient ventilation.

Storage

Keep only in original container. Store closed container at cool and aired place. Store at 5 to 40°C. Store in a dry place.

Hygiene

At work do not eat, drink and smoke. Remove soiled or soaked clothing immediately. Work in rooms with good ventilation. Wash hands before breaks and after work.

Fire prevention

Pay attention to general rules of internal fire prevention.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Sufficient ventilation and exhaustion.

Hands

In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the gloves. Glove material specification [make/type, thickness, permeation time/life, wetting resistance]: fluorinated rubber; 0,7mm; 480min; 60min;

Eyes

tightly fitting goggles

Respiratory

Not necessary. In case of insufficient ventilation or long-term effect use breathing apparatus.

Skin/Body

protective clothing

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
pasty
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
pasty
Colour
yellowy-brown
Colour Intensity
---
Form
---
Odor
characteristic
Odor Threshold
not determined
Ph
not determined
Melting Point
not determined
Boiling Point
not determined
Flash Point
250 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
not determined
Vapor Pressure
not determined
Vapor Density
not determined
Relative Density
1 g/cm3
Bulk Density
---
Density
---
Flammability
not applicable
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
350 °C
Decomposition Temperature
not determined
Solubility
not determined
Partition Coefficient
not applicable
Solubility In Water
No or low immiscibility
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
not determined
Kinematic Viscosity
not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No information available.

Reactivity

No information available.

Hazardous reactions

Reactions with acids. Reactions with oxidising agents.

Avoid

Keep away from heat.

Incompatible

Acid, concentrated; Oxidising agent, strong

Decomposition

Nitrogen oxides (NOx) Carbon monoxide and carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Remove in accordance with local official regulations.

Disposal

Remove in accordance with local official regulations.

Waste Codes

12 01 12* spent waxes and fats EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Metabo Kühlschmierstift?

The signal word is no signal word.

What is the physical form of Metabo Kühlschmierstift?

Metabo Kühlschmierstift is a pasty appearing as pasty with yellowy-brown color. It has characteristic odor.

What is the solubility of Metabo Kühlschmierstift?

not determined

What is Metabo Kühlschmierstift used for?

Lubricant

What is the melting point of Metabo Kühlschmierstift?

The melting point is not determined and the boiling point is not determined.