Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LPA01 PASTA ABRASIVA
- Product Code
- LPA01
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Matting abrasive paste for paint surfaces
Uses advised against
Only for professional use.
Manufacturers & Suppliers
Industria Chimica Reggiana I.C.R. Spa
manufacturer
Via Gasparini, 7 42124 REGGIO EMILIA Italia
+39 0522/517803
Emergency Contacts
Industria Chimica Reggiana I.C.R. Spa
+39 0522-517803
NHS
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous components within the meaning of the CLP regulation and related classification:
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha - hydrocarbons C10-C13, n-alkanes, isoalkanes, isoalkanes, cyclics, <2%aromatics EC: 918-481-9 | --- | 20 - 25% | Yes |
| Triethanolamine EC: 203-049-8 | 102-71-6 | 1 - 3% | Yes |
All component substances of this product have been registered under REACH or are exempt from REACH registration. Substances in Section 3 not showing REACH registration codes are exempt from registration.
Notes
This product is not classified H304 due to its high viscosity.
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash with plenty of water and soap.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Do not under any circumstances induce vomiting.
Immediate Medical Attention
OBTAIN A MEDICAL EXAMINATION IMMEDIATELY (ingestion); seek medical advice (eyes).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water. Carbon dioxide (CO2).
None in particular.
Do not inhale explosion and combustion gases. Burning produces heavy smoke.
Move undamaged containers from immediate hazard area if it can be done safely.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protection equipment. Remove persons to safety. See protective measures under point 7 and 8.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.
collect with non-combustible absorbent material
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes, inhalation of vapours and mists. See also section 8 for recommended protective equipment.
Keep away from food, drink and feed. Adequately ventilated premises.
Do not eat or drink while working.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use protective gloves that provides comprehensive protection, EN374 Class 3 (F). Permeation time > 60 minutes; 0.4 mm thickness.
Not needed for normal use. Anyway, operate according good working practices.
Not needed for normal use.
No special precaution must be adopted for normal use.
Emissions from ventilation systems or from work processes must be checked as to ensure compliance to environmental protection legislation. In some cases the addition of vapour scrubbers, filters or other system modification may be necessary in order to reduce emissions to acceptable levels.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended use and storage conditions (see point 7).
Stable under normal conditions
It may catch fire on contact with oxidising mineral acids, and powerful oxidising agents.
Stable under normal conditions.
None in particular.
None.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
The substance is not readily biodegradable.
12.3. Bioaccumulative potential
Not bioaccumulative
12.4. Mobility in soil
The substance floats on water, evaporates from liquid and solid surfaces, and poses a risk of polluting the water table.
12.5. Results of PBT and vPvB assessment
The substance does not meet the criteria for PBT or vPvB classification.
12.6. Other adverse effects
No other adverse effects reported.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recover if possible. In so doing, comply with the local and national regulations currently in force.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- N.A.
- Transport Class
- N.A.
- Packing Group
- N.A.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulatory information for LPA01 PASTA ABRASIVA
Volatile CMR substances = 0.00 %; Halogenated VOCs which are assigned the risk phrase R40 = 0.00 %; Organic Carbon - C = 0.19
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LPA01 PASTA ABRASIVA?
The signal word is no signal word.
What is the physical form of LPA01 PASTA ABRASIVA?
LPA01 PASTA ABRASIVA is a pasta appearing as pasta bianca with bianca color. It has di idrocarburo odor.
What is LPA01 PASTA ABRASIVA used for?
Matting abrasive paste for paint surfaces
What is the melting point of LPA01 PASTA ABRASIVA?
The melting point is N.D. and the boiling point is N.D..