Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium perchlorate, anhydrous, ≥99.9% trace metals basis
- Product Code
- 931950
- Chemical Name
- Sodium perchlorate
Regulatory Identifiers
- CAS Number
- 7601-89-0 Check regulations →
- REACH No.
- 01-2119540521-50-XXXX
Identified Uses
Laboratory chemicals, Manufacture of substances
Manufacturers & Suppliers
Merck Life Science BV
manufacturer
Ildefonse Vandammestraat 5/7B B-1560 HOEILAART
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substance name : Hyperchloric acid sodium salt Index-No. : 017-010-00-6 EC-No. : 231-511-9
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium perchlorate EC: 231-511-9 | 7601-89-0 | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air. Call in physician.
Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.
After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Has a fire-promoting effect due to release of oxygen. Ambient fire may liberate hazardous vapours.
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Sodium perchlorate, anhydrous
CAS: 7601-89-0
Sodium perchlorate monohydrate for analysis EMSURE®
CAS: 7791-07-3
Sodium perchlorate monohydrate for analysis EMSURE®
CAS: 7791-07-3
Ammonium perchlorate
CAS: 7790-98-9
Potassium perchlorate
CAS: 7778-74-7
Potassium perchlorate
CAS: 7778-74-7
Potassium perchlorate for analysis EMSURE® ACS
CAS: 7778-74-7
Magnesium perchlorate
CAS: 10034-81-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Work under hood. Do not inhale substance/mixture.
Tightly closed. Separately or together with other storage conditions oxidising substances only and away from sources of ignition and heat. Store under nitrogen.
Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance.
Keep away from open flames, hot surfaces and against fire and explosion sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material : Nitrile rubber Break through time : 480 min Glove thickness : 0,11 mm Protective index : Full contact Manufacturer : KCL 741 Dermatril® L Material : Nitrile rubber Break through time : 480 min Glove thickness : 0,11 mm Protective index : Splash contact Manufacturer : KCL 741 Dermatril® L Remarks : This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D- 36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter : Filter type P2 type:
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature) .
No data available
Violent reactions possible with: Strong acids Alcohols Cyanides Risk of explosion with: ammonium compounds Metals Reducing agents magnesium combustible substances
no information available
Iron, Mild steel
For Hazardous combustion products in the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1502
- Shipping Name
- SODIUM PERCHLORATE
- Transport Class
- 5.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium perchlorate, anhydrous, ≥99.9% trace metals basis?
The signal word is danger.
What is the physical form of Sodium perchlorate, anhydrous, ≥99.9% trace metals basis?
Sodium perchlorate, anhydrous, ≥99.9% trace metals basis is a solid with no data available color. It has odourless odor.
What is Sodium perchlorate, anhydrous, ≥99.9% trace metals basis used for?
Laboratory chemicals, Manufacture of substances
What are the hazard statements for Sodium perchlorate, anhydrous, ≥99.9% trace metals basis?
This substance has 4 hazard statements:
- H271: May cause fire or explosion; strong oxidizer.
- H302: Harmful if swallowed.
- H319: Causes serious eye irritation.
- H373: May cause damage to organs (Thyroid) through prolonged or repeated exposure.
What is the melting point of Sodium perchlorate, anhydrous, ≥99.9% trace metals basis?
The melting point is 471,8 °C and the boiling point is No data available.