Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- X-Rayfresh
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Concentrated detergent for cleaning of x-ray textiles by hand
Manufacturers & Suppliers
King Srl
manufacturer
Via Torino 95, 10040 (TO), Italy
+39 (0)11 994 77 60
Emergency Contacts
Poison Information Center
070-24 52 45
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tens. Anionic | 85117-50-6 | 5 - 15% | Yes |
| Tens. Anionic | 9004-82-4 | 5 - 15% | Yes |
| Tens. Nonionic | 68439-54-3 | 5 - 15% | Yes |
| Tens. Nonionic | 192-10-8 | 5% | Yes |
| Comp. Perfuming | --- | 5% | Yes |
| Dyes (C.I. 74180 42090 C.I) | --- | 0.1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Ventilate the area. Immediately remove the person from the contaminated premises to rest in a well ventilated area
Immediately take off contaminated clothing. Rinse immediately with plenty of water and soap the body areas that came into contact with the product, even only it was suspected.
Wash immediately and thoroughly with running water, keeping eyelids raised for at least 10 minutes. Then protect the eyes with a dry sterile gauze.
You can administer activated charcoal in water, or liquid paraffin.
Immediate Medical Attention
Seek immediate medical attention. Immediately call poison center or physician. If you feel unwell, call poison center or physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, CO², foam, chemical powders according to the materials involved.
Waterjets
None in particular, but if exposed to direct thermal radiation toxic fumes can be formed. In contact with metals and exposed to direct thermal radiation, flammable gases can be formed.
If possible take away the containers from the fire ground, or cool down acting from a protected position.
Firefighter Protection
Always use respiratory protection if you operate in closed and poorly ventilated areas and in the case halogenated extinguishers are used (fluobrene, Solkane 123, naf, etc.), also safety helmet and full protective suit are mandatory. A water curtain can be used to protect people involved in the extinction.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop the leak if you can do it without risk. Move away people from the possible spreading area who are not involved in the emergency intervention. If possible operate windward.
Use internal plant and operating procedures to avoid the product entering the drainage system or in water courses.
collect the spilled material mechanically. Store the absorbed material in clean and labeled containers. Clean the floor with water.
Materials: inert absorbent material (sepiolite, sand or other non-combustible material)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Verify the integrity of the containers prior to movement. When possible operate windward. Strictly avoid contact with the eyes and prolonged contact with the skin. Handle in well ventilated areas. The container, once emptied, must be conveyed without delay to the area identified for the collection of the same pending disposal or submitted to reuse. Never reuse empty containers before they have been subjected to industrial cleaning or reconditioning. Before performing transfer operations make sure that within the containers no residues or incompatible substances are present.
Store in closed and labeled containers. Containers should be protected from corruption, accidental shocks and falls. Store in a well ventilated, dry and cool area. Protect against direct sunlight.
Food and beverages should not be consumed in areas where the substance is used or stored. Eating and drinking is only allowed after removing contaminated clothing and protective equipment and washing your hands. Always wash your hands after handling the mixture.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The workplace must be adequately ventilated
use rubber gloves approved according EN 374
safety glasses with side shields according to EN 166
not necessary, if wanted use filter type according EN141
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions (see section 7)
Neutral product, do not mix with acids or bases
None in particular, however avoid mixing with acids or oxidizing agents
None in particular, however avoid exposure to high temperatures
Acids and flammable liquids
Can produce toxic gases during combustion
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for X-Rayfresh?
The signal word is warning.
What is the physical form of X-Rayfresh?
X-Rayfresh is a liquid with blue color. It has scent flower odor.
What is X-Rayfresh used for?
Concentrated detergent for cleaning of x-ray textiles by hand
What are the hazard statements for X-Rayfresh?
This substance has 2 hazard statements:
- H315: Causes skin irritation
- H319: Causes serious eye irritation
What is the melting point of X-Rayfresh?
The melting point is <0°C and the boiling point is no data available.