Synfluid® PAO 2 cSt

Consult a physician after significant exposure. If unconscious, place in recovery position and seek medical advice.

Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

Keep respiratory tract clear. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital.

Symptoms: Material may produce a serious, potentially fatal pneumonia if swallowed or vomited.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

High volume water jet.

Standard procedure for chemical fires.

Standard procedure for chemical fires.

Use personal protective equipment. Ensure adequate ventilation.

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Materials: sand, silica gel, acid binder, universal binder, sawdust

Avoid formation of aerosol. Do not breathe vapors/dust. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.

Keep container tightly closed in a dry and well-ventilated place. Observe label precautions.

Smoking, eating and drinking should be prohibited in the application area.

Normal measures for preventive fire protection.

Adequate ventilation to control airborne concentrations below the exposure guidelines/limits. Consider the potential hazards of this material (see Section 2), applicable exposure limits, job activities, and other substances in the work place when designing engineering controls and selecting personal protective equipment. If engineering controls or work practices are not adequate to prevent exposure to harmful levels of this material, the personal protective equipment listed below is recommended. The user should read and understand all instructions and limitations supplied with the equipment since protection is usually provided for a limited time or under certain circumstances.

The suitability for a specific workplace should be discussed with the producers of the protective gloves. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Eye wash bottle with pure water. Tightly fitting safety goggles.

If ventilation or other engineering controls are not adequate to maintain minimal oxygen content of 19.5% by volume under normal atmospheric pressure, a supplied-air NIOSH approved respirator may be appropriate. If exposure to harmful levels of airborne material may occur, a NIOSH approved respirator that provides protection may be appropriate, such as.: Air-Purifying Respirator for Dusts and Mists / P100. A positive pressure, air-supplying respirator may be appropriate if there is potential for uncontrolled release, aerosolization, exposure levels are not known, or other circumstances where air-purifying respirators may not provide adequate protection.

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. Wear as appropriate:. Protective suit. Safety shoes.

This material is considered stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

Stable at normal ambient temperature and pressure.

Hazardous polymerization does not occur.

No data available.

May react with oxygen and strong oxidizing agents, such as chlorates, nitrates, peroxides, etc.

No decomposition if stored and applied as directed.

Use material for its intended purpose or recycle if possible.

Do not dispose of waste into sewer. Do not contaminate ponds, waterways or ditches with chemical or used container. Send to a licensed waste management company.