Synfluid® PAO 6 cSt HVI

If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

Remove contact lenses. Protect unharmed eye. If eye irritation persists, consult a specialist.

Keep respiratory tract clear. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Do not use a solid water stream as it may scatter and spread fire.

Do not use a solid water stream as it may scatter and spread fire. Cool closed containers exposed to fire with water spray.

Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas. Material can create slippery conditions.

No special environmental precautions required.

Wipe up with absorbent material (e.g. cloth, fleece).

Materials: absorbent material (e.g. cloth, fleece)

For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.

Electrical installations / working materials must comply with the technological safety standards.

Smoking, eating and drinking should be prohibited in the application area.

Normal measures for preventive fire protection.

Adequate ventilation to control airborne concentrations below the exposure guidelines/limits. Consider the potential hazards of this material (see Section 2), applicable exposure limits, job activities, and other substances in the work place when designing engineering controls and selecting personal protective equipment. If engineering controls or work practices are not adequate to prevent exposure to harmful levels of this material, the personal protective equipment listed below is recommended. The user should read and understand all instructions and limitations supplied with the equipment since protection is usually provided for a limited time or under certain circumstances.

The suitability for a specific workplace should be discussed with the producers of the protective gloves. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Eye wash bottle with pure water. Tightly fitting safety goggles.

Wear a supplied-air NIOSH approved respirator unless ventilation or other engineering controls are adequate to maintain minimal oxygen content of 19.5% by volume under normal atmospheric pressure. Wear a NIOSH approved respirator that provides protection when working with this material if exposure to harmful levels of airborne material may occur, such as.: Air-Purifying Respirator for Dusts and Mists / P100. Use a positive pressure, air-supplying respirator if there is potential for uncontrolled release, aerosolization, exposure levels are not known, or other circumstances where air-purifying respirators may not provide adequate protection.

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. Wear as appropriate.: Protective suit. Safety shoes.

No decomposition if stored and applied as directed.

Stable at normal ambient temperature and pressure.

Further information: Stable under recommended storage conditions., No hazards to be specially mentioned.

No data available.

No data available.

No decomposition if stored and applied as directed.

If this material is classified as a hazardous waste, federal law requires disposal at a licensed hazardous waste disposal facility.

Use material for its intended purpose or recycle if possible.